Recent content by Traj13

  1. Traj13

    << Solved >> Monterey and HD530 : Black Screen after boot

    With igfxonln=1 The system boots (I can hear the drives, the leds on my audio interface are on) but the monitor gets stuck in the verbose screen And as before, it’s working if I put the nvidia card on the computer (but let the HDMI plugged to the motherboard)
  2. Traj13

    << Solved >> Monterey and HD530 : Black Screen after boot

    And I really don’t understand why, with the last settings written in the previous post, the HD530 is working properly only if the Nvidia card is plugged. That’s crazy. I can boot with the HDMI directly plugged to the HD530, I have full acceleration, use his “graphic acceleration” in photoshop...
  3. Traj13

    << Solved >> Monterey and HD530 : Black Screen after boot

    Hi guys and thanks for the replies, @Feartech , I've checked my bios settings, everything was compliant to your advices. @Middleman , while testing your settings, I had the same issue : black screen after boot. At this time, the best setting I've found is : But with that settings, the HD530...
  4. Traj13

    << Solved >> Monterey and HD530 : Black Screen after boot

    Thanks for the link, a lot of informations. I'm not sure that I will understand something, but I will try ;)
  5. Traj13

    << Solved >> Monterey and HD530 : Black Screen after boot

    @Feartech , thanks again. I moved the lines to the correct section, but I doesn't changed. While searching on Tonymac forum, I've found this tread. I added lot of stuffs in my config.plist :lol: (to enable the hdmi port of the iGPU) And it worked, but... Only if the GTX710 is plugged to the...
  6. Traj13

    << Solved >> Monterey and HD530 : Black Screen after boot

    Ooo yes, I made a mistake !! I’ll try asap
  7. Traj13

    << Solved >> Monterey and HD530 : Black Screen after boot

    Thanks, The Nvidia card is always removed from the PCIe port when I try to use the HD530, I only use it to try to make the HD530 working. I've added device-id >Data > 1B190000 : But it stills the same : black screen.
  8. Traj13

    << Solved >> Monterey and HD530 : Black Screen after boot

    @Feartech , thank you very much for the advices and the fast reply. Unfortunately, it doesn't works. - I changed : APPL,ig-platform-id to 00001219 - Removed : complete-modeset - Removed : device-id - Removed : framebuffer-patch-enable (And checked my DVMT, it was already 64mb). Now my...
  9. Traj13

    << Solved >> Monterey and HD530 : Black Screen after boot

    Hello, I made a fresh Monterey 12.3.1 install on my old z170 build (gigabyte z170x-ud5-th - intel 6700k - HD530 - Opencore 079). Everything is working flawless except the HD530 integrated graphics (I also have a GTX710, but I don't want to use it). As I'm struggling since a few days, (it's...
  10. Traj13

    Solved! Anyone have USB 3.0 working on their Gigabyte GA-Z170-X UD5 TH under Sierra?

    Thanks a lot !!! I just forgot the line <array> between <key>KextsToPatch</key> and <dict> Now USB3 is working at correct speeds. Thank you again.
  11. Traj13

    Solved! Anyone have USB 3.0 working on their Gigabyte GA-Z170-X UD5 TH under Sierra?

    Thanks guys! I will try this afternoon. EDIT : I made something wrong, USB 3 not working. I paste USBinjectAll in both 10.12 and Other folder, like in your screenshot. Then I copy/paste the 100 series code in my config.plist : <dict> <key>Comment</key>...
  12. Traj13

    Solved! Anyone have USB 3.0 working on their Gigabyte GA-Z170-X UD5 TH under Sierra?

    Hi In-N-Out, USB 3 is not working for me since I went to Sierra, same MB... I tried the new USBinjectAll.kext too, but it didn't changed anything. I made a direct update from El Cap to Sierra, I'm planning to try with a full install.
  13. Traj13

    [GUIDE] Jerivalu’s Build: Fresh 10.11.5, Z170X-UD5 TH, 6700k, Intel HD 530, Thunderbolt, Dual Boot

    For people who have issues with nvidia cards on the same config, i followed that process : - install last nvidia web driver - reboot - install AGDPfix -> download it form here (end of the first post, thanks to shilohh for that easy tool) - reboot with boot flag "nvda_drv=1" (you can set it in...
  14. Traj13

    [GUIDE] Jerivalu’s Build: Fresh 10.11.5, Z170X-UD5 TH, 6700k, Intel HD 530, Thunderbolt, Dual Boot

    Hi and thanks for your wonderful guide, I have the same motherboard and same processor and the install works at the first time, which is incredible. Sooooo easy !! Thank you very much Jerivalu, you made my day :clap::clap::clap:
  15. Traj13

    OS X Driver for NVMe M.2 Solid State Drives Released

    I don't really know the Kingston and I did not see many people talking about it here. I ordered the sm951 AHCI and I will find a good heatsink. That's will be a good thing because m2 drives can be really hot, even I put the heatsink for the look!!! We can find small heatsinks for cheap, in...
Top