Oh man this is really doing me in.
It puts the display to sleep, I can access folders over the network, I can continue screen sharing if a session is open, but not start a new one.
Out of frustration, I did a fresh OS Install, went back to CaseyJ's OC 0.9.2 EFI with the iGPU config and just...
So I switched to iGPU in the hope I might be able to put a dormant nVidia card in the machine I can just use in Ubuntu.
All working fine on display and acceleration is working etc, but it seems to break sleep.
Sleep was working perfectly on the AMD card.
Now if I leave the machine idle past the...
Anyone else having no connection issues with their i225V?
It was working with the AppleIGC until I installed Windows which seems to have messed with it somehow.
Now I get 'unplugged' always on the 2.5gbe port, and when I plug into the gigabit port, it shows 2 NICs are connected with different...
Ok thanks. So do you mean if I had enabled that quirk, I wouldn't have had the garbled ‘Still waiting for root device’ error that prevented installation? Because there is actually a new note/warning in the Dortania guide to map the USB ports prior to installation on newer macOS versions to avoid...
Right you are!
From what I can gather, as of Monterey and newer, Z79 boards will require the USB ports mapped *prior* to installation.
So for me this meant installing Windows first temporarily and using USBToolbox to map the ports.
USBInjectAll.kext may have also worked temporarily to allow to...
Hmmm, still doesnt seem to work. Still just getting this.
What are BIOS settings these days for this board?
I'm loading Optimised Results then.
Display to iGPU
Disabling the Serial Port
Disabling Thunderbolt (for installation at least)
Disabling VT-d (tried both ways)
Or would anyone...
Trying to upgrade my network to 2.5Gbs but just can't get the 2.5Gbs NIC to work.
What's the current formula for getting 2.5Gbs to work on Ventura?
I have AppleVTD fully enabled (by virtue of using @CaseySJ's newest EFI)
Have trying disabling the FakePCID kext for 2.5Gbs and adding e1000=0 to...
Thanks for that info. Just not sure why the Macmini7,1 in the EFI I posted doesn't work.
No Nvidia card in this machine, I only need iGPU just so the OS will install. It will run totally headless with no display once it's installed. (Actually a bit of a Frankenstein project I'm building into...
Can't for the life of me get Monterey Installer to boot. It gets to a certain point, then the screen corrupts and I get the no-go symbol.
Trying to get this to work on a spare board I'd like to use as a backup file server mostly so ultimately it won't have a display.
I just want to get...
While I wait for my BCM94360 card to come, thought I better check if there really is no way to get Intel BT going in the meantime.
For anyone needing Intel Bluetooth on 13.4, until BluetoothFixup is updated we can add these keys to
NVRAM > 7C436110-AB2A-4BBB-A880-FE41995C9F82
Key
Value
Type...
Thats good news!
It's a shame that Amazon mostly sucks outside the U.S.
Ok ordered NG version A$47 inc postage.
Be glad to see the end of hacks & wokrarounds getting the Intel working!
Yes quite unfortunate.
Apart from the cost of the Fenvi card, I dont have any spare pci-e slots.
Does anyone know if these would work as a swap out for the intel wifi-bt module...
Just had to get a new case to fit 6950 and dealing again with fan and AIO cooling connections.
Re-reading this
Makes sense, but how do we know which headers corespond to these raw numbers?
e.g does CPU_FAN = FAN1? or is SYS_FAN1 = FAN1?
What number is CPU_OPT? (my AIO cooler has 2 separate...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.