Recent content by thevoiceover

I'm having a hard time understanding what you are looking for. Could you please break it down on different lines what you are requesting? Thanks..

Didn't know if you guys were aware that most of these old BIOS on these GA boards can be modded and the internal SATA / Jmicron / Realtek drivers can be updated on them? Many people report way quicker boot times, etc from this. There is a modded version here...

I am not home where I can look at your DSDT, Do you have your DSDT or is this just patches ? As for looking for entries, have you searched just for USB ? Like " Device (USB0) " ? Thx, TVO

A somewhat native way to seem to get this going that has outlasted updates is AppleALC, just make sure your layout id is set to 7 in your dsdt (or whatever method you use) and that you have no enablers running with a stock/vanilla AppleHDA. I just keep this kext of AppleALC in my Clover...

Hello to you all and thank you for the time to possibly read over this or help me troubleshoot. I have read many of the other threads and most of them seem to be Kepler based or require the web drivers and that is what I'm hoping to avoid. I purchased a GT 740 primarily over the 750 as the...

Guys, I was one of the guys way back (did a bunch with Thomas in the starts and jumped to clover before many on this product) so I have experience way back, even chatted with Akbar during the bios days but can't get in touch with him. My main question is I am taking the leap to get this box...

The funny part is I can't run clover w/o the supplied ones you have, it panics and freezes when trying to pull mine... Either way, turns out it still wasn't this, my nvram wasn't being stored correctly. I updated to 2298 and installed it and the values are now being stored, so when I send...

Thank you for the clarity on this, I will just hold on to this card until (if) 5GHz ever gets implemented, but until then, no reason to have a card that only does 2.4GHz for me. Thank you also for the repo w/ *DT patches, I have found this useful regardless. TVO

So, I was a little confused on the Azurewave AW-CE123H that seems to come highly recommended from being posted here! From what it sounds, this uses the BCM943352, correct? I take this is different than the BCM94352 card, correct? From this assumption, I would think the BCM943352 is ok in dual...

----FIXED (fixed my computer not going to sleep) I cleaned an old section in my DSDT from a leftover network card (Atheros making it Airport friendly, I don't have this network card as mine is oob friendly) and regenerated my SSDT.. It still wasn't working after this, but then it finally...

So I check my assertions and all of them = 0, When I took the darkwake=0 flag out of startup, it doesn't even attempt to fall to sleep. I find this problem strange as I am running the same PC as many people here, virgin installed w/ problem still persisting. My clover is the latest version...

RehabMan, so when I first tested going to sleep from the Apple menu, I had my BT dongle in, so that wasn't a "fair" test. I just realized this and took it out. To my surprise, it went into sleep mode properly. This still doesn't explain to me why when I set it from energy (1 minute to...

I am using all the ones selected from the guide in this page. I even copied your clover over for testing (the one in the zip) and also used all the kexts you included other than nullcpumanagement.. This got to me so much, I did a fresh install and still a no go. I see the apple intel manager...

Yes, I set my sleep down to one minute, test it that way , and I test by clicking my power and selecting the one that says sleep.. I wait like 2 minutes and my power button led is still on ( monitor black though.)

Assertion status system-wide: BackgroundTask 0 PreventDiskIdle 0 ApplePushServiceTask 0 UserIsActive 0 PreventUserIdleDisplaySleep 0 InteractivePushServiceTask 0 PreventSystemSleep 0...