For future reference I'll leave the following here: I tested many different USB 3 devices and found 1 that did work as expected without any port mapping or tweaks. Many others still not functional at all (not showing up apart from in system report etc.). Very strange, as under Mojave+clover...
I performed a clean install (and post install time machine backup) of Big Sur 11.5.2 with OpenCore on a machine I had previously running with Mojave and Clover. Everything seems to work perfectly apart from the USB3 ports which seem to not be working/detected with any USB device, but do show up...
The active adapter mentioned above has something strange going on with it. Bought an rx580 with the exact same results. Tried again with a passive adapter (cable) and this one works fine with both DP connectors with full acceleration. HDMI and DVI not working. I suspect the 570 to behave...
Another strange thing just happened: starting from the previous situation(where the first display went to black and the second one got activated through DP but with artefacts). After waiting for the pc to go to sleep and waking it, the first screen also got activated without artefacts. Second...
Did not check the second tab, removed it, no dice.
Just did another test with each connection separately. Separately, all of them go to black screen.
My monitors have only DVI in. For testing hdmi I use a passive hdmi to dvi adapter. For testing DP I have an active DP to hdmi adapter.
I just...
Ok, gave it another go by removing OsxAptioFix2Drv-64.efi, disabled igpu and made the changes in clover configurator. See attached config.plist. Same behavior.
Thanks a lot again! The only other thing I can see in the config.plist related to integrated graphics is the ig-platform-id, which I'll remove. Anything else I should remove?
Hey @P1LGRIM, thanks for the quick reply. I'll remove one of those files. With regard to the graphics, what do you suggest should I remove/add? I tend to make changes in clover configurator if that helps.
Kind of a clickbait title, but it is true...
Long story short: wanted to upgrade my machine. Bought an RX580 as per apple and tonymacx86 recommendation to have an OOB card, but it is not working in Mojave for me. At the graphics init stage, after the apple logo boot screen, the screen goes...
I would like to comment for other users with a Lenovo u310 that installing Mojave 10.14.4 succeeded for me and I have a system that is functional enough for me(but could possibly be made even better).
I would like to sincerely thank @RehabMan for all the tools and help, as well as @gynekolog for...
I did some experiments this weekend with the RX 570. I bought an active DP to HDMI adapter and got working display output with that on one of the DP connectors on both my Mojave and High Sierra unibeast sticks and my straight update from Sierra. It even looked like acceleration was...
Hey Iceking
I did not get any further than 10.12.6, which worked perfectly, with Metal support (card detected as r9 xxx or something like that). As I have the option to possibly return the card, I will try to do that. I'll try a more widely used gfx card, like an RX 580 Pulse, just to rule out...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.