Recent content by svilen

Guys i want to inform you that there is working kext for our touchpad. As soon as they are ready with the last modifications on VoodooI2CHID and Alps4TUSB will let you know. For now i can share the modified voodooi2chid and mine Alps4TUSB.kext which is working with T4 and U1 touchpads...

Load the SSDT and install VoodooI2C and VoodooI2CHID. Reboot and look at ioreg under PCI0.I2C0 is VoodooI2C loaded. Also under PCI0.GPI0 should have voodoo. Show us the output of sudo dmesg | grep -i voodoo, you would need DebugEnhancer kext to dmesg to show the logs from Voodoo. Also see if the...

Hello guys, I'm trying install and configure Hackintosh my work laptop. It is Dell latitude 5580. CPU -> i7-7820HQ CPU (Kaby Lake) iGPU -> Intel HD Graphics 630 1536 MB (Need to disable the dGPU Nvidia) Chipset -> 100series/CM230 (or 238, can't figure out which one) Any way, i'm trying to...

Try this one. If i'm right it should be enough to enable your I2C. And i guess you would need some satellite kext https://github.com/VoodooI2C/VoodooI2C/blob/master/Documentation/Satellites.md

Well I finally figure it out. I was using wrong platform-id the whole time. After I switch to 0x0A2E008 all the problems with the system just disappeared. Usually after a long time with HDMI monitor connected the mouse starts to freeze for a half a second and it was doing this every 10 seconds...

Still no success but after allot of testing i find out something strange. When i restart the laptop in IOreg shows the right connector type - 00 08 00 00, as soon as i plug the HDMI cable it turns back to 00 04 00 00. Which i think could cause the problem. I've read the guide by RehabMan about...

Hi guys, Few months ago i switch from Clover to OC. Manage to get almost everything to work. Create my custom codec for AppleALC (different internal microphone index from other IDT92HD95 codecs in AppleALC). So now my internal/external microphone/speakers are all working fine. The only thing...

Everything works fine. With the power adapter, on battery every time sleeps and wakes without any problem. Maybe you should check your DSDT, there was some patches for Reboot on Wake. Or some of the moderators here the check your configuration and tell you where is the problem.

Hmm, i have no issues anymore. Let me test again and will share the results here.

After the last update 10.15.5 sleep is working again!

Just disable sleep mode for now. # Save original values, when you need them to re-enable sleep pmset -g # To disable sleep sudo pmset -a sleep 0; sudo pmset -a hibernatemode 0; sudo pmset -a disablesleep 1; # And to go back to normal sudo pmset -a sleep 1; sudo pmset -a hibernatemode [original...

After i update to 10.15.4 the machine reboots every time when i try to wake it up after sleep. Report files attached. ~  kextstat|grep -y applehda ✘  ~  kextstat|grep -y applelpc ✘  ~  kextstat|grep -y appleintelcpu ✘  ~  kextstat|grep -y acpiplat 16 2 0xffffff7f83012000...

Try this one, diskutil list -> it will show you all available disks and volumes, search for your NTFS drive (it will be something like this /dev/disk2s1 for example) mkdir ~/Desktop/NTFS sudo umount /Volumes/{Volume name} sudo mount -t ntfs -o rw,auto,nobrowse /dev/disk{X}s{Y} ~/Desktop/NTFS It...

Hi guys, I have some problems with USB3, when i boot the machine with the usb connected to it, it's connect to SSP1. Which is my USB3 port. After sleep or disconnect and connect the usb drive it's connect to HS2. Can't use the USB3 capability of the port anymore and have to reboot with the usb...

Hi guys, i'm using El Capitan, as a main OS for my Laptop (G710) and i've manage to make it stable enough. My question is, whether Sierra is already stable enough. Did i have to re-patch my SSDT/DSDT. I'm asking because in Common Problems Thread still have some unsolved problems. Are they...