Recent content by surgeinc

  1. surgeinc

    [Success] AMD RX6000 Series working in macOS

    @tedyun I really appreciate finding this one. Saved the day!
  2. surgeinc

    [Success] AMD RX6000 Series working in macOS

    Good evening / day / basement? I've got a MSI RX 6900 XT Gaming Z Trio which is the XTXH model and I'm attempting to get this to work. The device-id doesn't appear to be taking but the model rename does so I'm not sure where to go next. Any guidance would be helpful. From gfxtool 03:00.0...
  3. surgeinc

    [Solved] 10.12.5 Latest MultiBeast, instant restart loop

    Update: I've reset to Clover r4045 and using a modified version of the UniBeast disk I used. I've attached my new config.plist here and everything appears to be working. For the most part I took out some of the Skylake patches incase that was what was bothering the booting. It appears to work...
  4. surgeinc

    [Solved] 10.12.5 Latest MultiBeast, instant restart loop

    Update, Using an old UniBeast disk I had running Clover r4045 I was able to boot which is an improvement over the newer versions of clover I had running on a new UniBeast or that came with Multi / SF. I've gotten in and reinstalled clover a few times and reviewed my EFI-Backups that I had on...
  5. surgeinc

    [Solved] 10.12.5 Latest MultiBeast, instant restart loop

    Thanks Trying both the above injection and switching back to the GTX card my results are, as far as I can tell, the same. Booting from disk causes instant restart after the pluses. Booting from Unibeast gets me to a point where it complains: Busy Timeout[0] ... kextd wait AppleACPICPU
  6. surgeinc

    [Solved] 10.12.5 Latest MultiBeast, instant restart loop

    Giving this a try now. If I had IGFX disabled and was using only the GTX card would this have been moot?
  7. surgeinc

    [Solved] 10.12.5 Latest MultiBeast, instant restart loop

    Update: Still running F20 bios. I've played with the bios a touch ensuring that I match completely what guides suggest and am using the IGFX. Booting from system drive running Clover 4081 (I think) still results in instant resets after row of pluses. Booting from the Unibeast device running...
  8. surgeinc

    [Solved] 10.12.5 Latest MultiBeast, instant restart loop

    Hardware: * Gigabyte GA-Z170X-Ultra Gaming (Bios' F20, F21, F22, F23d) * Intel i7-6700k * MSI GTX 980TI * Presto Pro Gigabit NIC Had a working system, did the 12.5 upgrade, rebooted fine installed the updated web drivers, restarted, made the mistake of updating my bios DURING this restart, now...
  9. surgeinc

    Black Screen with MacPro 6,1 or iMac 15 or iMac 17 System Definition

    Any change to number of monitors in your setup?
  10. surgeinc

    HELP—I got Sierra running and then it broke

    It would be helpful if you could add -v as a boot flag to clover when booting from ssd . You can do this on demand by pushing space on the clover load screen and then selecting verbose in the set of options before continuing the boot. What I'm looking for is a photo or some detail about how...
  11. surgeinc

    HELP—I got Sierra running and then it broke

    From the installer you can open terminal, mount your hard drive, adjust files, reboot without caches I believe.
  12. surgeinc

    Skylake + macOS Sierra Graphics Cards

    Thanks for the input! I ended up grabbing a GTX980Ti and am using it in a 17,1 w/ the fixes outlined on these forums. For anyone else who reads it I've found that only have one monitor is the key to booting success btw!
  13. surgeinc

    Solving NVIDIA Driver Install & Loading Problems

    I came here to say this, do the monitor cable dance and it worked for me! Edit: I'm still running El Capitan so it's not limited to Sierra but I am also using an iMac17,1 SMBIOS
  14. surgeinc

    Black Screen with MacPro 6,1 or iMac 15 or iMac 17 System Definition

    SUCCESS! Alright so I've been fighting with this for a little over a week. New i7-6700k system tried with a GTX960 and a GTX980Ti. In all cases it _always_ put my screen*s* to sleep during boot. I've tried all methods, 1, 2, and 3 without success. Until. Until I only had one monitor plugged...
  15. surgeinc

    Solving NVIDIA Driver Install & Loading Problems

    I must have the worst luck :) I just applied the Meth2 fix, even going a little beyond that and NYET! My system is responding fully in the background (I'm making mods through SSH and restarting to see if it works but alas... *dramatic hand to forehead*) Any ideas on things I should look at...
Back
Top