Recent content by stinkdog2008

Thank you for your help, but I fixed it using this guide http://www.tonymacx86.com/el-capitan-desktop-guides/174726-guide-asrock-uefi-boot-fix.html For some reason fixing my UEFI boot, also fixed the sound.

I went ahead and attached screenshots so you can see. I'm pretty sure I'm looking in the right spot? It took me about an hour after I made the post to get the graphics card to work, but the system recognizes my nVidia GTX 550ti card now, dual monitors. It works. Each monitor is connected...

Well when I went to the folder where the AppleHDA.kext is suppose to be, there is nothing there that is called that. Graphics is working, but the system definition is off, if that means anything. I don't get why the sound isn't working. I have gotten the sound to work in 10.6, 10.7, 10.8...

So I decided to redo my Unibeast flash drive. As I was going through the installation, I saw that I could inject nvidia before the installation, so I did. Then after I did a fresh install of 10.11.2, I ran multibeast and selected my choices (selected to inject nvidia. I still can't get my...

No Sound - Realtek ALC AppleHDA [Guide] Description of audio problem Fresh install of OS X 10.11.2. According to motherboard website, I should use Realtek ALC1150. I ran multibeast and installed Realtek ALC1150. When I restarted the computer, I don't have any audio outputs available. I also...

So I downloaded Clover Configurator and I mounted the EFI partition. It keeps saying can't find config.plist. Not sure what that means. I'm sorry I'm such a noob at this. I've never used Clover before. I used Chimera only in the past, so I'm totally new to Clover. Edit: I went into...

What does that mean? And what do I do?

Sorry for not putting that in the thread! I installed OS X 10.11.2 I turned the computer off, plugged in the graphics card, and got the to boot screen. Went into Clover to add a boot command. It had the nvda_drv=1 command already inputted. I added the -v and tried to take screenshots as fast...

Hello, So I 2 SSDs in my computer. Both of them are OCZ ARC 100 240gb models. One of them is Windows 10 and the other is this hackintosh 10.11.2. I made a unibeast USB drive with Clover, from the installation guide, and installed everything (Currently working out the graphics and audio...

Hello, I haven't installed a hackintosh since 10.10.3, so it's been a while. I got the hackintosh (OS X 10.11.2) installed using Clover. (When I install on my setup, I have to unplug the cable to the graphics card and install using the onboard graphics Intel HD Graphics 4600). Was able to...

1. Currently on 10.11.2. Using Multibeast to install audio codec, after restarting there is nothing showing up in the Sound tab. Use to get sound working in Yosemite. 2. OS X 10.11.2. Motherboard is ASRock Fatal1ty Z97 Killer. CPU is Intel Core i5-4460 Haswell 3.2GHz LGA 1150. Graphics Card is...

So a little update, I think I fixed everything. I decided to take the PCI E cable out of my EVGA GeForce GTX 550 TI Graphics Card. I left the card in, but now I was using the Intel HD Graphics 4600 Integrated Graphics. I used my UniBeast Yosemite flash drive and booted up only using...

So I followed this guide http://www.tonymacx86.com/yosemite-desktop-guides/144426-how-install-os-x-yosemite-using-clover.html I checked "Install for UEFI booting only", "Install Clover in the ESP", and checked the same Drivers64UEFI that were in the pictures "EmuVariableUefi-64"...

So I downloaded Yosemite 10.10.3 one more time, redid UniBeast. I used boot flags -x -v GraphicsEnabler=Yes (using No resulted in a black screen) IGPEnabler=No maxmem=2048 -no-zp. I put the flash drive in the back of the computer, rather than the front (even though I've always used the front no...

I've never used Clover, only Chimera. Should I make the switch?