Recent content by scottkendall

It looks like they are saying that it has the same ID as a Radeon VII, so that support might not have been in place when last I looked at them.

It was also day time reruns in the 80's I used to watch it when I was sick.

Seems like you been at this for a few days trying stuff having it not work. When ever I have issues I start with a fresh EFI From @pastrychef golden build (because I know all files will be unto date) and then I remove what ever I do not want. I have removed most everything and left it almost...

Seems a bit high since on Newegg its running about $550 - $600 for the WX7100. However the WX9100 is much much more.

Yes I know it has 6 but dude only need 4 and if it has 6 it has 4. The 9100 is based on Vega tech, the 7100 is basically a workstation 580. The 8200 may not be supported and wasn't a few months back however, based on the 8200 specs it looks like a workstation Vega 56.

The AMD Radeon Pro WX 7100 or WX 9100 both have 4 display ports, and both cards are supported.

The difference is the route in which it takes to the CPU. I am not a 100% but on an iMac I pretty sure that the TB3 goes threw the PCH and that is likely why Designare board is one of the easier routes to get hot plug. I was never able to get the Titan Ridge to work with Hotplug personally. The...

I think what they meant to say was that on the Designare board "TB3" is connected to the CPU via PCH "Platform Control Hub" lanes rather then PCI-E Lanes. So it is slightly slower then if it was connected via PCI-E lanes and it might have to wait in line if something else is using the PCH bus.

Windows controls the BIOS these days. So I would guess that Windows is booting up, setting what ever it does for the RBG in the BIOS and because you do not power down the information remains in the BIOS. Does it remain after you're hack sleeps?

nv_disable1 is for Nvidia card you do not need it, Radeon deinit is old way uncheck it. Download lilu and whatevergreen and install them where the rest of your kext are.

Well dam that is messed up did you contact the manufacture? To see if they are aware or have an answer?Either way the link in the previous post is an ITX board that is set up with a Vega.

Not very much but if you do a search you can find some stuff, there are some post about Success: https://www.tonymacx86.com/threads/10-7-4-hp-z800-success-64-bit.53552/ This is a guide for z600 so it might help...

Just happened to stumble upon this with Vega. https://www.tonymacx86.com/threads/success-asrock-z390-phantom-gaming-itx-tb3-igpu-mojave-sff-build.277418/

Try updating clover.

My solution was to update my EFI using @pastrychef I downloaded his, saved my Config and USB SSDT and replaced the EFI folder on the EFI drive with his. I then put my config and USB file back in place and all was right. That was with the Z170 board, with the z370 board I made the update to the...