Recent content by sbilo

  1. sbilo

    GIGABYTE GA-Z170X-Designare

    I'm using the port closest to the PS2 port as well, that one seems to have the pass trough enabled. My setup consists of: RX480 Displayport out -> Z170X Displayport in -> Z170X Thunderbolt out (next to the PS2 ports) If you use the Integrated Graphics the other thunderbolt port (furthest from...
  2. sbilo

    GIGABYTE GA-Z170X-Designare

    I'm using the apple thunderbolt 3 to 2 adapter here, it connects my cinema display just fine.
  3. sbilo

    GIGABYTE GA-Z170X-Designare

    That should be possible. Just install windows first to upgrade the thunderbolt firmware and you're good to go
  4. sbilo

    GIGABYTE GA-Z170X-Designare

    I have the setup running pretty well at the moment (including audio, sleep etc), one thing that might not work for you is chaining the displays if you plan on using a dedicated GPU (only one of the thunderbolt ports seems to output the pass trough DisplayPort data so you have to somehow use that...
  5. sbilo

    Plextor m8pegn 256G m2 m.2 pcie - Mac OS Sierra - RehabMan, Pike NVMe latest status

    This is what I've tried so far: * Found my ahci path using IORegExplorer, * Created the aml using that path. * Created HackrNVMeFamily using --spoof and 10_12_3 * Added HackrNVMeFamily to /EFI/Clover/kexts/other * Set inject kexts in config.plist * Added the plextor specific patch to kexts to...
  6. sbilo

    Enabling AMD RX 4XX cards in Sierra.

    I haven't used Unigine Heaven on my machine yet, but running Valley gives me a score somewhere between 1800 - 1900 on Extreme HD settings. With only adding the device ID to 4100X kext. Without inject Ati (which seemed to decrease my performance) or other patches. Do you get decent performance...
  7. sbilo

    Enabling AMD RX 4XX cards in Sierra.

    What happens if you try to start with only the hdmi cable attached to the dGPU (meaning a blind start). Do you still end up with 2 displays?
  8. sbilo

    Plextor m8pegn 256G m2 m.2 pcie - Mac OS Sierra - RehabMan, Pike NVMe latest status

    Did you also use the patched AML? If so could you post it? I've tried several methods, (patched AML and removing IONVMeFamily.kext), but I can't get the SSD to show up.
  9. sbilo

    Plextor m8pegn 256G m2 m.2 pcie - Mac OS Sierra - RehabMan, Pike NVMe latest status

    Also having troubles with this m.2 device. Didn't try patching on 10.12.3 yet, but this is what I see in IORegistryExplorer:
  10. sbilo

    Enabling AMD RX 4XX cards in Sierra.

    Didn't compare, so I couldn't tell for sure. But since the patching process was the same I doubt there were any changes.
  11. sbilo

    Enabling AMD RX 4XX cards in Sierra.

    I'm using an iMac 17,1 system definition, so never used it.
  12. sbilo

    Enabling AMD RX 4XX cards in Sierra.

    It feels like you do have OpenCL acceleration, I wouldn't be surpised if that works out of the box (the AMD9500Controller has support for the RX480 without changing it). Are you sure you added the right ID to the AMDRadeonX4100.kext? Also after editing it make sure you clear your cache with...
  13. sbilo

    Enabling AMD RX 4XX cards in Sierra.

    I just updated, restarted (lost acceleration), reapplied the patches to the AMD9500Controller and AMDRadeonX4100 kexts, refreshed the kext cache and restarted. That was it.
  14. sbilo

    Enabling AMD RX 4XX cards in Sierra.

    Did you set your primary display to the pci-e slot of the rx 480? Luxmark and Unigine benchmark different things, lux is openCL, unigine is openGL. How is your user interface responding in MacOS?
  15. sbilo

    Enabling AMD RX 4XX cards in Sierra.

    Keep in mind you don't have crossfireX in MacOS, but you can use the cards separately no problem. The 10.12.3 changes haven't had impact on enabling the RX4xx cards since 10.12.2.
Top