Recent content by romanusgermanicus

  1. romanusgermanicus

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

    @RehabMan I have just updated my HP Probook 450 G2 Haswell from the PBI to your hotpatch method: excellent work from you, thank you! Here are some minor issues I have noticed (for my model): - the G2 Haswell uses the SSDT-KEY87.aml - install_acpi.sh without argument prints help text that...
  2. romanusgermanicus

    Weird BT behavior with Atheros AzureWave AR9285 and Magic Mouse

    Please verify that testing the BT mouse without wifi should include: 1) disabling WIFI in your access point(s) 2) moving the laptop to a place where there are no other 2.4GHz networks (e.g. from your neighbours) 3) checking that your computer is not set up as an access point (e.g. WIFI...
  3. romanusgermanicus

    Weird BT behavior with Atheros AzureWave AR9285 and Magic Mouse

    I had the same issues with my Magic Mouse. It appears to be related to interference between WIFI and Bluetooth, see also here: https://support.apple.com/en-us/HT201542. My problems went away after I had switched from a 2.4GHz to a 5GHz channel. Hope this helps.
  4. romanusgermanicus

    HP Probook 450 G2 (Haswell) - issues after upgrade to El Capitan

    As of this morning both the wake-up after 7 hours of sleep and three short-term sleep-wake cycles (with either BT or Wifi turned off) have been without incident. I have reinstalled Little Snitch to see if that will influence the behaviour.
  5. romanusgermanicus

    HP Probook 450 G2 (Haswell) - issues after upgrade to El Capitan

    Ok, will remove them and get back after some more tests, thanks! P.S. I'd really miss the benefits of a host-based application firewall like Little Snitch, is there another or a better way to control outbound traffic on the host?
  6. romanusgermanicus

    HP Probook 450 G2 (Haswell) - issues after upgrade to El Capitan

    Thank you again for your help! Both 'Wake for network access' and 'Power Nap' are disabled in Energy Saver settings. Here are the requested files: Please note that the following folders have been removed from the CLOVER folder in the attached archive: misc, doc and themes
  7. romanusgermanicus

    HP Probook 450 G2 (Haswell) - issues after upgrade to El Capitan

    The situation has improved, but I still see reboots on wake every now and then. I have compared the logs for successful and unsuccessful wake-up scenarios (note that I have omitted some log entries most likely unrelated to the issue): 1. Successful wake after 7.5 hours of sleep Nov 26...
  8. romanusgermanicus

    HP Probook 450 G2 (Haswell) - issues after upgrade to El Capitan

    I think I can answer my question myself: in the original DSDT file the relevant PRW methods return 0x6D, so I will start over and try the "usb_prw_0x6d_xhc.txt" patch. If everything works fine I will ask Nguyenmac to update the relevant parts of the PBI.
  9. romanusgermanicus

    HP Probook 450 G2 (Haswell) - issues after upgrade to El Capitan

    Thank you! How would you know whether to use 0x6D or 0x0D? I have applied "usb_prw_0x0d_xhc.txt" without success, and searching for _PRW methods in my patched DSDT revealed this: Device (HS06) { Name (_ADR, 0x06) // _ADR: Address...
  10. romanusgermanicus

    HP Probook 450 G2 (Haswell) - issues after upgrade to El Capitan

    The patch will make six changes to the stock PBI DSDT (after installation): It will remove two _PRW methods (for devices LANC and XHC) and add these four statements for the addresses that match: begin Name(_PRW, Package() { 0x0D, 0 }) end; As you pointed out in your FAQ the two _PRW...
  11. romanusgermanicus

    HP Probook 450 G2 (Haswell) - issues after upgrade to El Capitan

    I thought that the PBI did apply the PWR patch, but apparently only partially. This is what it does during installation (for a PB 4x0 G1/G2): # set _PRW methods to return 0 into method label _PRW parent_adr 0x001D0000 code_regex Return[^(]*\([^(]*\(([^,]*)[^)]*[^,]* replace_matched begin...
  12. romanusgermanicus

    HP Probook 450 G2 (Haswell) - issues after upgrade to El Capitan

    OK, everything is working now! Here's what I changed after installation of latest PBI CE: 1) Implemented Clover patch to rename EHC1 to EH01 and EHC2 to EH02 @nguyenmac: this should probably go into the PBI as a default patch for the DSDT 2) created custom USB injector for the XHC...
  13. romanusgermanicus

    HP Probook 450 G2 (Haswell) - issues after upgrade to El Capitan

    thank your for your help, here is the registry:
  14. romanusgermanicus

    HP Probook 450 G2 (Haswell) - issues after upgrade to El Capitan

    I am happy to help, here is my injector: But, and here is where I still need some help, although all ports work, USB 3.0 speed does not! I have modelled my injector configuration after the output of the command lsusb of my Linux system, which sits on the same computer. This revealed the...
  15. romanusgermanicus

    bcm4352hmb: bluetooth not working but wifi yes after update to 10.11

    I guess you are having the same problem I had: http://www.tonymacx86.com/el-capitan-laptop-support/174392-hp-probook-450-g2-haswell-issues-after-upgrade-el-capitan.html Try creating an injector kext based on one of the linked samples from Rehabman's excellent guide about this issue...
Back
Top