I tried the SSDT-X299-Vega64.aml implementation and it is also working.
I initially thought the Vega FE approach could be the better solution because the WX 9100 is very similar to the Vega FE.
But anyway, I keep the Vega64 implementation.
Thank you.
@pieropontra
yes, it is an expensive card...
Yep, all 6 ports are DP, no HDMI.
So Kamerang (3x DP, 1x HDMI) is the wrong framebuffer.
I tried with Wenamu (6x DP), the only one I found, which shows up properly in IOreg. But then I got hotplug issues.
Actually there is no problem with WEG and my SSDT.
I was just wondering if anybody out...
Hi all,
does anybody has a well working SSDT implementation for the Radeon Pro WX 9100?
This is mine at the moment, but I need Whatevergreen to make all 6 MiniDP outputs work.
Scope (PEGP)
{
Device (EGP0)
{
Name (_ADR, Zero) // _ADR: Address...
1.) ok, thanks...
2.) I don't need this patch. Maybe because I got only 6 cores...
3.) But it is different. Slot-1 (upper-most) is BR3A on my mainboard. See screenshot.
Do you have stable idle frequencies with your CPU?
Just updated one of my older rigs (Haswell-E i7-5820K, X99-A II unlocked MSR).
Everything is working so far.
XCPM looks good (machdep.mode and machdep.loaded_vectors_count), but CPU frequencies are jumping around in idle.
Tried all kernel patches in different combinations, best result for me at...
I cannot confirm this.
I can connect 4 displays to the Vega: 3 4K via DisplayPort and one HD via HDMI.
Actually the 3 4Ks are not displays but Datapath FX4 interfaces where I can program EDIDs.
But all sink devices are recognised properly by macOS, see screenshot.
Maybe it is an EDID and/or...
As said this guide works for both X299 and C422, so there is no need for a separate guide.
I investigated the IOregs of the Asus Prime X299 and the Supermicro C422. They are identical in many parts.
Again thank you for your work @kgp
Most likely the Skylake-X CPUs will be natively supported...
The Supermicro boards are solid and stable mainboards.
No onboard fancy RGB LEDs and all that useless stuff ;)
I'm building machines for heavy production use, so I recommend Xeons and ECC RAM.
There is a reason why Apple always used these components in their pro workstations.
Installation is...
My new build is a bit different:
Xeon W-2155
Supermicro X11SRA
AMD Vega FE
10.13.2
Got everything running thanks to your guide.
At the moment I also cannot boot without FakeCPUID.
Just injecting plugin type via SSDT, PM seems ok but not perfect.
Seems like one last piece is missing.
And I...
Hello.
I recently updated my X99 system from 10.11.6 to 10.12.6.
Now X86PlatformPlugin.kext is not loading any more, which means PM is broken.
I found this in log:
com.apple.driver.X86PlatformPlugin: The following symbols are unresolved for this kext.
com.apple.driver.X86PlatformPlugin...
No, did not forget that. Actually the SmallTree driver is working with FakePCIID and FakePCIID_Intel_GbX.
I was trying to make it work without FakePCIID but with SSDT edits.
I injected the subsystem-id 0a into the device and I also can see the change correctly in IOreg.
But the SmallTree driver...
I got an Intel X540-T1 10Gbit card and it is working well with PCIFakeID.
Now I was wondering if it is possible to spoof the subsystem id via SSDT edit to make the SmallTree driver work.
Like this:
Device (PCI1)
{
Name (_ADR, Zero)
Method...
Hello again,
I still have the OsxAptioFix reloc block error from time to time.
I'm on the newest Clover r3577.
Does anybody have a solutions for this?
cheers
Roland
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.