Recent content by remy666

  1. remy666

    [Guide] Intel NUC7/NUC8 using Clover UEFI (NUC7i7Bxx,NUC8i7Bxx,etc)

    I have a NUC8I7BEH and I'm using Clover
  2. remy666

    [Guide] Intel NUC7/NUC8 using Clover UEFI (NUC7i7Bxx,NUC8i7Bxx,etc)

    Hello I got an m2 adapter and installed a BCM4360CS2 inside my NUC. I created a USBPorts.kext using hackintool. I wanted to know in the Patched folder of your EFI which aml I have to remove to avoid conflict with my kext.
  3. remy666

    [Guide] Intel NUC7/NUC8 using Clover UEFI (NUC7i7Bxx,NUC8i7Bxx,etc)

    Hackintool indicates the audio device is a Realtek ALC235 I tried the layout from this page for ALC235 https://github.com/acidanthera/AppleALC/wiki/Supported-codecs Same issue with every ID tested :s
  4. remy666

    [Guide] Intel NUC7/NUC8 using Clover UEFI (NUC7i7Bxx,NUC8i7Bxx,etc)

    The audio Layout is already 28. Reset HDA is unchecked, does it have to be checked ?
  5. remy666

    [Guide] Intel NUC7/NUC8 using Clover UEFI (NUC7i7Bxx,NUC8i7Bxx,etc)

    It's all good, I plugged the wrong hdmi cable to my NUC. My old monitor only supports higher resolution via dp ou dvi, I switched to a hdmi-dvi cable and everything worked. I still have a problem with the audio low volume bug. I'm using the headset output and have a NUC8I7BEH
  6. remy666

    [Guide] Intel NUC7/NUC8 using Clover UEFI (NUC7i7Bxx,NUC8i7Bxx,etc)

    Hello, first of all thanks Leesureone for your hard work keeping this thread alive. I used your Clover EFI and everything works fine except for the graphic part. I can't have a resolution higher than 1080p. On my 30" monitor I'm stuck at 1920x1080. I tried to go over the many pages but there...
  7. remy666

    [Guide] Intel NUC7/NUC8 using Clover UEFI (NUC7i7Bxx,NUC8i7Bxx,etc)

    I'll try it. One thing that I didn't notice at first. But the bluetooth is functionnal ?? I thought wifi-bluetooth via Intel chipset didn't work. I have a usb bluetooth dongle that I use on my hackintosh. I unplugged it and forgot to plug it and then realized that without the dongle my...
  8. remy666

    [Guide] Intel NUC7/NUC8 using Clover UEFI (NUC7i7Bxx,NUC8i7Bxx,etc)

    I tried to use Leesureone EFI, it works great with Catalina (had nothing to do). But when I try to use it with Mojave I had many troubles. First of all I had to use the -no_compat_check to boot the installer. And when I'm in the graphic installer, my AFPS partition is greyed and I have the...
  9. remy666

    Broadcom WiFi/Bluetooth [Guide]

    F..k I installed BrcmNonPatchRAM2 instead of BrcmPatchRAM2. Thank you very much RehabMan for your help
  10. remy666

    Broadcom WiFi/Bluetooth [Guide]

    Sorry, here is the debug generated
  11. remy666

    Broadcom WiFi/Bluetooth [Guide]

    This is the correct report with everything up to date --- I have installed on my HP Elitedesk 800 G3 Mini 65W (Skylake version i5 6500 HD Graphics 530) a m.2 wifi-BT card with a Broadcom BCM94352Z. https://www.amazon.fr/gp/product/B079FQP3QR/?tag=tonymacx8607-21 I’m running Mojave...
  12. remy666

    Broadcom WiFi/Bluetooth [Guide]

    Here is the report with the correct IOreg Edit : sorry, wrong version see my post below
  13. remy666

    Broadcom WiFi/Bluetooth [Guide]

    Sorry, the IOreg is the wrong one I generated before I configured the USB with a custom SSDT. I'll post the good one tomorrow.
  14. remy666

    Broadcom WiFi/Bluetooth [Guide]

    I have installed on my HP Elitedesk 800 G3 Mini 65W (Skylake version i5 6500 HD Graphics 530) a m.2 wifi-BT card with a Broadcom BCM94352Z. https://www.amazon.fr/gp/product/B079FQP3QR/?tag=tonymacx8607-21 I’m running Mojave. I followed this guide for Wifi injection (installed with kextbeast in...
  15. remy666

    HACKINTOSH? HP ELITEDESK 800 G3 MINI

    Here is my EFI. I managed to get Mojave working on my EliteDesk 800 G3 Mini. It's a Skylake i5 6500 with Intel Graphics 530. My HDD is a Toshiba nvme KXG50ZNV256G I formatted in APFS. Everything is working except intel wifi/bluetooth (but it's normal) and sleep/wake is also not working (normal...
Top