Recent content by r2tincan

I have not yet got Open Core to boot, but for anyone else running Asus 3203 on the Sage/10g and the 10980xe with clover, adding SSDT-AWAC fixed it! Thanks for the help so far. Gonna try to get open core working next.

Thank you for posting this. I transfered onto a USB, open core booted the bootloader but would not enter MacOS. I get OCB Security Violation. The only thing I changed was my type to iMacPro (since I'm on mojave), serial number, motherboard serial, and my UUID.

If I need to switch card slots on your EFI, can I do that? How? My Radeon is in slot 5 because its 2x slots wide and I have a thunderbolt card installed.

I can't upgrade to Catalina due to the lack of app support. I do not think Kext files should be causing boot problems because I have not changed anything on my mac partition, only my BIOS and adding that .aml file. I will attempt to boot with your open core EFI! Thanks

I removed the RAID controller completely and it still would not boot. I just put it back in, because it contains the NVME drives for Windows.

Thanks, will do. For reference, this is the error I'm getting when trying to boot 3203 with the RTC0.

To be clear, I attempted to boot 10.14.6 with the RTC0 file and it did not boot at all, with BIOS 2002. I am not clear on which file I need for the bios upgrade. I will upgrade the BIOS now to 3203 and see if it boots with only the RTC0 file. I look forward to your EFI! Thanks

Ok I'll do this next time. Per the instructions i wasn't sure if i needed the awac file or the one for cascade lake x chips... Or both? Should i not have modified it?

I downloaded the SSDT-RTC0 (was this the correct one?) I am running 10.14.6 with a 10980xe. I edited the values to PCI0 from PC00 (because that's what I've been using) and now cannot boot. Should I not have edited it or did I download the wrong file? Do I need to change other SSDT / DSDT files...

This is the first moment I'm hearing about AWAC. I still need it even if I'm running Mojave and Clover? I will install if so, thank you. Do you have a tutorial about how to fix the audio device paths for clover? Much appreciated

Many of my industry specific tools do not work in catalina, yet.

I couldn't get the system to boot with the "kgp" default settings at all in either of the two newer BIOS'. Reverting back to 2002 and the system boots again. I did clear CMOS a bunch of times, and re-enable 4g decoding set to auto. Very weird. Using verbose mode, it looked like the last thing...

Hi there, did you ever find a fix for this? I can't boot with any newer BIOS on my ASUS Sage/10g

I am unable to boot after upgrading my X299 Sage/10g to 3203 BIOS running 10.14.6. Everything else has stayed the same. I have tried enabling/disabling all Above 4g options. The apple progress bar fills up almost completely but will not go into OS. I can't seem to make out any significant...

Thanks! Do I set the switch on the S36 unit to "AUTO" or "PWM" ?