Recent content by pinktank

  1. pinktank

    [Guide] Creating a Custom SSDT for USBInjectAll.kext

    My final question. The system works as noted above, except when I boot with my monitor (hardware calibration + built in usb 3.0 hub, EIZO CS2420). If I boot with the monitor plugged in, it auto-wakes from sleep without the display and ejects drives. Any ideas? If I boot with the monitor in...
  2. pinktank

    [Guide] Creating a Custom SSDT for USBInjectAll.kext

    As promised here are two zip files, each containing ACPI dumps and Ioreg for BIOS 1.20 and 1.21 for the Asrock z270 ITX, though the change is supposed to be minute, the 1.20 did not have the usb-eject issue while 1.21 does, perhaps someone can figure out a difference we can patch? In 1.20, HS SS...
  3. pinktank

    [Guide] Creating a Custom SSDT for USBInjectAll.kext

    *Solved at #3150 To update, I tried downgrading my bios to 1.2(original release) which solves the usb eject issue, but this introduced a new problem, USB2.0 devices populate both HXC(SS/HS) ports, creating 22 ports total. There is also the USR1 that gets simultaneously populated by some devices...
  4. pinktank

    [Guide] Creating a Custom SSDT for USBInjectAll.kext

    *Solved at #3150 Opencore so I'm not using the debug packer, hope the dropbox link below covers all. If I use USB Mapping, USB3 ports are sporadic, the devices will show up in HS at USB2.0 speeds but not always in the SS pair, replugging solves it, and if I replug again, it's a toss whether it...
  5. pinktank

    Asrock Z270 Gaming-ITX/ac is compatible / working?

    I cannot get usb-c to show up at all, do you have to include it in a usb map? Am I missing something? (I did not install the thunderbolt firmware in windows)
  6. pinktank

    HDMI 10bit (Not 4k) RGB outputting 8bpc(banding)

    Still no solution
  7. pinktank

    HDMI 10bit (Not 4k) RGB outputting 8bpc(banding)

    Also not true, clearly stated that I am running 10bit on displayport. Besides, you can get 10bit from consumer cards. Why don't we let people who might have an actual idea chime in, no point in guessing in circles.
  8. pinktank

    HDMI 10bit (Not 4k) RGB outputting 8bpc(banding)

    I don't know why you are commenting but the question is about getting 10bit output working properly, not about resolution.
  9. pinktank

    HDMI 10bit (Not 4k) RGB outputting 8bpc(banding)

    Hello all, I have a couple displays (NEC PA243W and EIZO CS2420) that get a 8bit signal (you can see stepped gradients) if I connect them via HDMI rather than DP. Sytem report shows 10 bit still but they are definitely not operating in 10. Was wondering if anybody had any idea. I know that with...
  10. pinktank

    [SOLVED] sleep=shutdown

    for brevity the following will delete all of them for you, include the star cd /Library/Preferences sudo rm -rf com.apple.PowerManagement*
  11. pinktank

    macOS Native CPU/IGPU Power Management

    There isn't a 8 series equivalent on toleda's repos to ssdt_lpcb-9series, Do you just use the 9 for both?
  12. pinktank

    macOS Native CPU/IGPU Power Management

    Do you have to use 8_Series/LPCB@1F and Frequency Vectors with the 4770k (imac 14,2)? This is with an nvidia attached running intel headless
  13. pinktank

    [solved] 200 Series SATA AppleAHCI

    Which injector did you end up using, attachments seem to be gone from the original thread *nm, found them on RMs github https://github.com/RehabMan/hack-tools/tree/master/kexts/SATA-unsupported.kext It did fix the naming and they now load AppleIntelPchSeriesAHCI instead of AppleAHCI. Is this...
  14. pinktank

    [Guide] Intel Framebuffer patching using WhateverGreen

    Hmm, I had sleep working fine with inject intel 59120003 but with the following the screen doesn't wake up, and if I replug the screen the system restarts. https://www.dropbox.com/s/l1qpnjjvgkb0m4c/debug_31377.zip?dl=1 It is not always the case, it used to be the same where I had two types of...
Top