Recent content by nobodynose

Unfortunately, something happened to the Z270 board, and I ended up replacing it with a Z370. I no longer have that SSDT lying around.

After installing this update, I started having a strange issue where "phantom" icons for my boot SSD start appearing on the desktop. These are just plain icons, but they behave like they're the actual drive (i.e. they're not aliases). I can't delete them, and they go away when I reboot. I can't...

https://www.tonymacx86.com/threads/asus-100-series-and-later-custom-ssdt-for-xhci-usb-port-control.253981/

If it's just a .kext then you'd just put it in EFI/Clover/Kexts/Other in the EFI partition of the USB installer.

My suggestion is to move only the Home folders (/Users) to a separate drive. This results in a very clean, easily maintainable installation. My system has a Western Digital WDC WDS256G1X0C-00ENX0 256GB M.2 NVMe SSD as the boot drive (Mojave SSD) and a Crucial CT960M500SSD1 960GB SATA SSD as the...

I finally got this system installed, but the methods I had to resort to were not pretty. What I ended up doing was to clone the SSD of my own machine (which is built around the same motherboard, the ASRock Z370M Pro4) to the new machine's SSD, then edited the config.plist on the new SSD to...

It's been a busy couple of weeks so I haven't had time to work on this until now. But replacing the Gigabyte motherboard with another ASRock Z370M Pro4 made absolutely no difference; the installation is still freezing on the second stage with "13 minutes remaining".

I can't get EFIClone.sh to run successfully with the latest beta of CCC (v5.1.8-b2). The log reports this: [Sun Jan 20 07:32:41 MST 2019] - ***** EFI Clone Script start [Sun Jan 20 07:32:41 MST 2019] - working directory = / [Sun Jan 20 07:32:41 MST 2019] - Running /Library/Application...

Some additional information as I've experimented - If I format the target SSD as APFS during the installation, it stalls sooner (before the 1st stage is even completed). If I format it as HFS+ it doesn't stall until the second stage. I will try installing on a regular SATA SSD to see if somehow...

No change in behavior. I'm becoming quite frustrated at this point.

This made no difference.

It is definitely failing to install - there is no disk activity, and the mouse cursor completely stops responding. I've allowed it to remain in this state for hours, with no further progress. After rebooting there are still no icons in the Clover menu besides the USB installer.

I added the device-id in Devices/Properties and the ig-platform-id in Graphics, but as before, the installation stalls with "About 6 minutes remaining". My RX 560 is from PowerColor.

I tried it with the initial changes you suggested, and I was still unable to complete the installation; however, there was a change in behavior. Instead of stalling with "About 15 minutes remaining" during stage 2 (booting from the SSD), it stalls with "About 6 minutes remaining" during stage 1.

I'd like to get the RX560 working, but if I can't then integrated graphics is acceptable. The EFI folder I just posted is intended for use with the RX560 GPU. I was under the impression that "InjectIntel", "InjectATI", and "InjectNvidia" were all deprecated and no longer used, which is why I...