Recent content by nijat12

  1. nijat12

    Kernel Panic CPU 0 caller 0xffffff....

    I accidentally hit update without thinking and now am stuck in Kernel panic. Any advice on how to get out of it?
  2. nijat12

    PCI expansion card for USB 3.0

    Thank you so much!!!!
  3. nijat12

    PCI expansion card for USB 3.0

    They seem to be only for adding USB slots in the back of the case. I need one with 20 pin slot so i can connect the front USB slots to the card. Would you happen to know a brand that has that?
  4. nijat12

    PCI expansion card for USB 3.0

    Hello. I need to get an expansion card for USB 3.0 that has a 20 pin connector. My case has 4 USB's in the front with 2 20 pin cables (blue tip) to connect to the mobo but my mobo only has one 20 pin slot and one USB 3.1 front panel connector. I bought an expansion card but it didn't work with...
  5. nijat12

    Cheapest GFX for High Sierra

    I've searched everywhere for this information. I have HD630 but it has a problem with running dual monitors at boot time and also issues with sleep. It seems like a dedicated graphics is the way to fix those issues but since i don't play any video games i needed something this cheap. So 710...
  6. nijat12

    How to enable 'Kaby Lake' Intel 6xx Graphics (10.12.6+)

    First of all thank you so much for all your help. I managed to get everything working. I still want to be able to boot up with both monitors plugged in instead of having to plug one after the boot. Is there a solution for this for 10.12.6 or do I need to get a graphics card? I am not planing on...
  7. nijat12

    Having problem with USB Expansion Card

    Thank you for that. I just returned the card. Where can i find a list of compatible cards to purchase so i can plug the 20 pin USB 3.0 cable and use the front USB ports?
  8. nijat12

    Having problem with USB Expansion Card

    My case has 4 USB 3.0 ports in the front that have 2 20 pin connectors to plug into the mobo. My mobo however only has 1 20pin slot for usb 3.0 I bought the following expansion card but the OS is not detecting it (10.12.6) https://www.amazon.com/gp/product/B01MQYWJ3O/?tag=tonymacx86com-20 Any...
  9. nijat12

    [Solved] Dual Monitor for on-board HD 630 graphics with 10.12.6

    Hello I finally managed to get on-board Graphics working with following: ACPI : patches : Rename HDAS to HDEF and Change GFX0 to IGPU. Boot : flag : -shikigva=1, -disablegfxfirmware Graphics : Inject Intel checked and ig-platform id :0x59120000 Device: IntelGFX: 0X59128086 SMBIOS : iMac 18.3...
  10. nijat12

    [Solved] Sierra won't boot from USB or SSD

    Thank you for that reply. Unfortunately, I panicked and formatted my hard drive by removing it and plugging it with USB adapter into a laptop. According to your post the thing that caused this was when I tried to change the .plist file with clover configurator using the specs mentioned in...
  11. nijat12

    [Solved] Sierra won't boot from USB or SSD

    Does anyone have a solution for this?
  12. nijat12

    How To Remove The G5 Upper Shelf

    Thank you for the tip. I went ahead and ordered the entire thing online before I saw your post. cost me near $20. I will add a tape to the clip this time to make sure I don't loose it
  13. nijat12

    [Solved] Sierra won't boot from USB or SSD

    I can boot from USB if I unplug the SSD but then once I get to Disk Utility and plug the SSD back on they don't show up. So my guess is I can not attach the drives after the boot
  14. nijat12

    [Solved] Sierra won't boot from USB or SSD

    Sorry, I am new to this and this is my first hackintosh. I installed 10.12.6 with UniBeast and after installing kext for onboard graphics now I can not boot anything. Not even from USB. I keep getting the AppleACPICPU error. I finished installing some kext using multiBeast. I am attaching the...
  15. nijat12

    How To Remove The G5 Upper Shelf

    I lost the C-clip when I was trying to push it back. Searched for an entire day and still can't find it. Do you guys know where I can buy one?
Top