Recent content by Nader70

  1. Nader70

    HDD (SATA) Unpluged in Bigsur

    I use SSD in main bay and use HDD (SATA) in dvd-driver bay. I just use CtlnaAHCIPort.kext. (HDD is samsung from 2015) I disabled "put hdd on sleep on any situation" I used command line "sudo pmset -c spindown 0" Prolem : After doing all above, when it is not in use, it will un-plug...
  2. Nader70

    battery charging indicator issue

    Thanks for usefull kext and information. My problem is after installation phase. I got -lilluforce boot flag refrence from your discussion below on insanelymac. will try without boot flag and report here. PS: ECEnabler.kext works fine without boot flag also.
  3. Nader70

    battery charging indicator issue

    Ps: After reviewing ECEnabler guide in it's Github page, i found it should be used with boot flag "-liluforce" in Nvram section, otherwise will not force APCI to render 8 bit. now battery plug-in indicator will work without any issue.
  4. Nader70

    battery charging indicator issue

    I tried ECEnabler and SMCBatteryManager without DTDC and ACPIbatterymanager = no success. Any idea? Am i doing something wrong?
  5. Nader70

    battery charging indicator issue

    Below is my last EFI configuration.
  6. Nader70

    app store log in problem

    After install BigSur 11.4 and changing wifi to en0 (ticked under BSD on hackintool) the app store show error: cannot connect to app store! serial generated by Gembios and is valid but expire. is there any fix for this issue guys?
  7. Nader70

    battery charging indicator issue

    Tried all suggested ways but unfortunately didn't work. with all ways battery indicator will not shown. just putting DSDT with ACPIbatterymanager.kext will fix it but same issue and while pluged in, there is no charging indicator. tnx anyway
  8. Nader70

    battery charging indicator issue

    Thanks a lot. Will test with your new information and update here.
  9. Nader70

    battery charging indicator issue

    I tried with smcbatterymanager.kext and without DSDT Unfortunately battery indicator totally is gone and trackpad so. Could you please share me a guid thread regard this. Thanks
  10. Nader70

    Big Sur installation stuck on progress bar (opencore)

    Hi My ACPI (DSDT, SSDT) were not correct. First of all, just download clover bootloader zip and flash it to USB. Only clover bootloader, you do not need any other installation files. Boot with that USB and press F4 and wait a second. All the DSDT and SSDT will generate into the usb. Then you...
  11. Nader70

    battery charging indicator issue

    Guys, i faced a problem with battery charging indicator in BigSur 11.4 on Hp Pavilion 15-cc102tx. - Issue: battery indicator is showing power source: battery when it either in plug or on battery and read-out percentage will not update during charging! - Note: 1- when it's un-plug draining...
  12. Nader70

    Big Sur installation stuck on progress bar (opencore)

    Hi. I am a little new to opencore and hakintosh. I carefully followed opencore installation guide through their website and gather onencore EFI related files from github accordingly to my laptop Cpu. Boot with. * All thing was ok execpt ACPI error showed on my screen but process continued and...
Top