The Atheros 2200 worked fine. I was confused between the z97X soc and the z97x soc force which have different network cards. After removing unused usb ports with Hackintool your efi worked brillantly.
I installed your EFI on a Z970X-SOC / 4790K/ RX580 with Sonoma 14.4.1 . I got it to work by setting SecureBootModel in Misc -> Security section to DISABLED and using iMacPro1.1 smbios. It works fine. Thanks a lot
Hello, I am having trouble getting USB on my Thunderbolt interface. The Thunderbolt connections work fine.
The Intel JLH8540 USB 3.1 is showing up in the pci report.
Any ideas welcome.
Well the problem was in the DisplayPort to Hdmi converters. I finally plugged my tv into a thunderbolt to HDMI adapater with the displayports form the graphic card into the motherboard DP connectors and all works fine.
I ordered a new Z690 board to replace the broken one. I just have to admit...
Regarding the displayports , they go into an displayport to HDMI converter and feed a 10m HDMI cable that links to my TV and second screen. The second screen sometimes appears , most often not, then goes blank, the TV sometimes says that something is connected but stays blank. I will purchase...
I am running into some problems with my RX580 video Card. It only works properly with the HDMI connexion. The 2 displayports don't work properly. I have changed the RX580 card from my previous hack and the same problem occurs. Could it be a power supply issue? The same thing happens in the...
Hi, I was wondering if I could use a 4K monitor on a Thunderbolt dock by taking a DP Thunderbolt out from my RX580, using the DP IN port on the Z690 ProArt and sending that on to my Caldigit Element Hub. Basically, does the DP In work on Thunderbolt? It would make my life much easier.
It was easier than my Designare builds fiddling through different BIOS and fixing the Thunderbolt. I will post here if anything shows up. However, I don't use wifi, Bluetooth, internal audio, sleep or iCloud. I use 3 screens, dante network and MTRX, and import and deliver a lot of stems on a...
They are different tools for different work. I could not mix a movie without a eucon surface like an s3 or s6. I do post pro. Logic is more music oriented. I will not enter a DAW debate.
I just built the Z690 ProArt Creator. It worked flawlessly with opencore 0.8.3 and monterey 12.6 with bios 2004. Thunderbolt UAD satellite recognised immediately with pro tools 2022.9. The onboard 10gig is really helpful in my work. Geekbench 5 2000 single 18900 multi. It didn't want to go m1...
I would like to report that bios F9i disconnects my UAD Thunderbolt 3 Octo satellite with UAD 10.1 after a few minutes. This does not happen on bios F9g with the exact same settings on Monterey 12.5 with opencore 0.8.3. This is both with a flashed thunderbolt and a regular thuderbolt designare.
Thank you CaseySJ. I changed to iMacPro1,1 after having logged out of my iCloud and Apple ID. Now everything works fine.
I can report that the new Monterey 12.5 function of being able to output 16 audio channels has enabled me to listen to Atmos films and music in my room. The only other option...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.