Recent content by modsuperstar

My build I was able to get everything all working with Mojave. It now has dual monitor output and everything else working. I think the only real big issue is HDMI audio out working, but I haven't worked too much on that one since it's a low priority issue for my needs.

I was following the USB patching instructions and ran across some weirdness with USB3. I couldn't actually get the USB3 device to be recognized when I plugged it in during that step. I skipped over it and moved on, but I feel like there's still some weirdness going on. I'm going to redo the...

@jeremymac I have updated my Github and do have a build that has working screen brightness and true sleep working. I also have a separate EFI where I got the GTX 1050 working. There's still lots of bugs with that one, so I kinda doubled back to using the HD 630.

I've been trying this out today and was wondering if I might have some other inherent issues with how my laptop is setup. I have 2 DVI monitors with an HDMI adapter and another with a DP adapter. I recently converted my setup to use WhateverGreen and using the previous graphics inject methods my...

Was curious if you've done any updates to this build @goldenegg? I've been working on an MSI GL72M 7RDX and was able to use some of your insight on fixing sleep to get mine to actually go to sleep, which is something I've been trying to achieve for quite awhile now. My build uses WhateverGreen...

I feel like I'm pretty close with sleep wake. I do have it working, but it causes the screen to flicker. I followed [this thread](https://www.tonymacx86.com/threads/solved-black-screen-after-upgrade-to-high-sierra.237050/page-5#post-1637335), but kinda arrived at a dead end after trying all the...

Can someone confirm I did this right? I just combined the values into Sublime Text for my own easy reading. Pulled EDID output value from EDID.hex Opened DisplayProductID-XXXX in PlistEdit Pro and got second value I copied the EDID output and replaced 95 with B5 and removed the 9C at the end I...

Can someone confirm I did this right? I just combined the values into Sublime Text for my own easy reading. Pulled EDID output value from EDID.hex Opened DisplayProductID-XXXX in PlistEdit Pro and got second value I copied the EDID output and replaced 95 with B5 and removed the 9C at the end I...

Deleted

Just saw this post @jeremymac. I'm working through my build on GitHub if you wanted to crib any of my setup and I'd love to connect if you make any progress on your end. My build is High Sierra. I did previously attempt running @gratebek's GL72M 7RDX build on Sierra, but it was pretty...

I have successfully installed High Sierra on my MSI GL72M-7RDX, but I've seemingly stalled out on making progress on a few of the issues. I have some previous experience with Hackintosh builds, but this is the first that's seemingly a bit of a stretch compatibility-wise. I found a thread with a...

Did you run into any issues with a "service only ran for 0 seconds" error when doing the install? I've been trying to get High Sierra installed on a GL72M-7RDX and it hung up in the middle of the install. The error seems to be tied to the dual graphics cards and I can't seem to disable the...

That was the issue. I thought I had a 1600x900 monitor, but my resolution was only 1366x768. Went through the patching again, installed SSDT-IGPU.aml and everything seems to be working.

I've had this same graphics issue pop up again after doing the rest of the installation of patches. Inject EDID isn't doing anything anymore to fix it, so now I'm again at a brick wall. I installed the SSDT-6x60.aml package, tried to reboot and I'm back to the vertical lines I posted initially...

I was able to finally boot into the installer by changing from Inject Intel to Inject EDID. Now onto the post install tweaks. Thanks for the help!