Hello @CaseySJ
I finally have some time to prepare a bootable backup, I'm on 12.6.2 right now. Can you tell me if I should follow the guide from this thread or the guide from your other thread?
I'm having some crashes on Adobe InDesign so I wanted to do a backup and then try to do an in-place...
hello @CaseySJ
I've been using the updated Hackintosh for a couple of weeks now, and it's working wonderfully! I plan to copy the system on my NVMe, but 2 questions:
1. on your Asus hackintosh guide, you said it's better to avoid Samsung NVMe. I got a Samsung 970 Evo since the beginning of this...
Dear @CaseySJ
I finally succeed to install Monterey. I was about to write you (to say that both NVMeFix and SetApfsTrimTiemout didn't work) when I saw @shimala post below having a similar problem. Then I realized that while I did the BIOS update, I haven't checked if any settings were...
- Yes, I'm pressing F12 to choose my boot disk (see screenshot, where my mouse is pointing).
- OpenCore version at the bottom right is: REL-087-2022-12-06
- Verbose logs are in the video attached (zip file)
Thanks a lot for your help, I'm so sad it's not working as it should be!
Especially...
Hi @CaseySJ
Unfortunately, I didn't work either and freeze at the beginning of the loading like everytime. I've opened the config.plist (using OpenCore configurator 2.65) to enter my serials numbers and got this:
Is this why it's not working? Saved anyway and restarted to try to install...
Thanks @CaseySJ fot your help, see attached
I'm very curious to know why it's not working! Because it seems I'm missing something even though I re-did the whole thing to make sure I haven't done any mistakes.
Can something wrongly set in the BIOS be an issue?
Well, @CaseySJ, it seems I'm not lucky at the moment :'(
I just can't boot Monterey installer, it's not working.
Here's what i did so far:
- updated to F9i BIOS with CFG-Lock disabled
- using OpenCore 0.8.3 EFI (from your post). I re-downloaded and did everything again.
- using OpenCore...
Great, thanks again for your help.
Just to make sure: the EFI folder you mentioned is the one that was initially from you, that I modified with my serials, changed SecureBootModel and ResizeAppleGpuBars etc... correct?
And then, I need to mount the USB EFI where I installed Monterey and place...
Yes, I think you're right. I was hoping to be able to switch from Clover to Opencore to spare me the hassle of re-installing everything (especially since it working so well at the moment) but a fresh install seems to be the best option.
Here's what I was thinking to do:
- install Monterey using...
Unfortunately, it didn't work. The boot stop exactly at the same moment (tried a couple of times), after the line "PCI configuration end, bridges 11", etc...
See attached a screenshot so you can check if I removed the boot argument properly.
@CaseySJ
I changed the SecureBootModel to disabled and it's not booting but now is displaying some infos (see video). It seems to stop mid-boot somehow. I tried a 2nd time and I think it stop at another moment during the boot.
Dear @CaseySJ
Thanks for your help. I've also been re-reading the guides to see if I made any mistakes but I can't find anything. Maybe my actual installation isn't 100% clean, so it gives me trouble?
Anyway, here's what I know so far:
- when loading OpenCore (using the USB stick on F12 boot) I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.