Contribute
Register

Recent content by manaba

  1. manaba

    Clover overriding config.plist settings at boot. C State settings, and #DropOEM_DSM not detected.

    I'm having a similar kind of issue. I was getting a black screen in High Sierra after installation (HP 8300 / i7-3770 / HD 4000) and thought i'd change the ig-platform-id to something else to solve it. I first changed it in Clover's boot options and noticed it did solve the problem, yay! Then i...
  2. manaba

    HP 4540s: "Product Information Not Valid" error message at system start up

    eric_in_or, you're my new god. Thank you so much for going through the work to write these instructions!! This fixed the issue i was having with my HP Probook 4730s (most propably will work for a 4530s also) where i got the "Product Information not valid" error (SYSTEM BOARD (00A) - Product...
  3. manaba

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

    Ok, thanks for this info. I had only OsxAptiofixDrv-64 installed and i now switched it to AptioMemoryFix. Are there some downsides or significant difference in using the latter or something i should expect after switching? I don't think i've had EmuVariableUefi-64, but i'm not completely sure...
  4. manaba

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

    Where did you look for those? Did you see them somewhere in the Sierra installation debug files? As said, for some reason my system doesn't save panic logs and i can't find any trace of them in the other logs either, but i can assure that they started appearing with High Sierra as well, in which...
  5. manaba

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

    That installation is not a new one, hence not current, but as said i have also tried High Sierra recently that had the same problem so it doesn't seem to be related to something that has changed after the date of that Sierra install since the problem is the same regardless. Although i'm not...
  6. manaba

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

    Hmm weird, i did read it carefully and thought i had everything in there. Nevertheless, here is the autogenerated version attached.
  7. manaba

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

    Hi Rehabman! I've been having random kernel panics for a long time on my Probook 4730s and i finally got around to try and narrow the problem down and noticed that it's related to sleep in that the panics only happen if the laptop has been in sleep mode. I've been able to confirm this is the...
  8. manaba

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

    After investigating i found that several manufacturers of USB3 ExpressCards use the Nec/Renesas chips on their devices and have OS X drivers for them available. Some even have NEC/Renesas's configurable firmware update tools available. So i used a Windows command line tool (provided by HP on my...
  9. manaba

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

    Ok, thanks. I actually was just now able to find out that it's specifically Nec/Renesas uPD720200a. There seems to be a Sonnet USB 3 ExpressCard that uses uPD720200 and the driver for that is El Capitan compatible and seems to work for some on El Capitan after flashing the chip with Sonnet id's...
  10. manaba

    Making NEC USB 3.0 Card Fully Comportable with Original MAC Drivers [CalDigit, LaCie, Oyen]

    Quandril, has your El Capitan install been working fine with USB 3? Which Sonnet driver did you install? I have an otherwise well working El Capitan install on my HP ProBook 4730s with 3xusb2 ports, but the uPD720200a rev4 port doest not work. So just to make sure: You flashed the Sonnet ID's...
  11. manaba

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

    Where do you see it's Renesas? I couldn't find that info anywhere. What's the process, should i uninstall AppleUSBXCHI.kext first or can that still be used for usb2 and the generic one just for the usb3?
  12. manaba

    [Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

    Hey RehabMan! Posting for three reasons: 1) To say huge thanks for continuing the work you do, it's just incomparable. Very very much appreciated. 2) Report of a successful installation of El Capitan on my ProBook 4730s on an SK Hynix Canvas SL308 SSD. Just to report, only little thing that...
  13. manaba

    [Guide] Install 10.11 on HP EliteBook/ProBook/others with Clover UEFI

    Hi again, sorry for the delay. I've now reinstalled the OS fully and again installed the intelbacklight kext, rebuilt cache, rebooted without caches, but the problem persists. I noticed now that the problem appears also when a window is not off the screen, but just somewhat large vertically. If...
  14. manaba

    [Guide] Install 10.11 on HP EliteBook/ProBook/others with Clover UEFI

    Hi, thanks for this. I installed it using kext wizard, rebuilt cache and rebooted, but the problem stays the same :(. I checked that the new version (1.0.5) is now loaded. Any other possible culprits?
  15. manaba

    [Guide] Install 10.11 on HP EliteBook/ProBook/others with Clover UEFI

    Thanks for your reply. I put everything in in the RehabMan-folder and zipped it. Attached. -M EDIT: Forgot to mention! It's very mystical, but after i attached an external monitor through hdmi and my firewire interface (through an firewire express card) the mouse click lag in programs...
Top