Recent content by LiveSorcerer

Is anyone having a problem installing MacOS Sonoma in this configuration: - Gigabyte Z590M Gaming - Intel i7 11700K - Radeon RX6800 XT 16GB It was working normally with OpenCore 0.9.3 and the Beta version of Sonoma, but versions 0.9.4 and 0.9.5 are not even loading the boot. I only updated...

I will check, because this configuration is no longer with me, it was sold. But the same mouse is working perfectly on the Macbook Pro.

Could you clear a doubt? Has it ever happened to you, to be using a wireless mouse, which in this case uses the usb dongle, to make the connection, but it keeps losing the signal? In this case it would be a Logitech M510 and a Dell Wireless that also uses this type of USB dongle. Could it be...

Unfortunately the same problem remains.

Anyone who has RX 6800XT has this same image problem on MacOS 12.3?

Or Click in my Signature. https://www.tonymacx86.com/threads/macpro-3-1-2019-killer.279358

I did it myself, and reuse the front panel and power board, the G5 is easier to make than the MacPro 1.1 to 5.1. And here I made casemod on G4, G5 and MacPro.

So, in my case, the problem was the fit of the PCIe card in the case, so I had to use pliers, to give a certain angle in the fit of the card, so that the GPU had this problem again. But in my case, I'm using an Apple PowerMac G5 Case, which I adapted to ATX standard, and it must have been very...

Yes, the PSU cables were connected to the Vega 56, as I always did. I just discovered the problem. The fitting that screws into the case was shorting out, and with that it gave the beep and did not turn on. I took the motherboard out and put the Vega in and it turned on normally.

I just tested an Nvidia GT730 and there were no beeps and it booted normally. Now the doubt, if the problem is the Vega 56 and the GTX 770, because it needs power supply or are they the problem?

It was already working before, it had this configuration since 2019, then this year I had to leave it with the iGPU for 1 month, because I needed this gpu on another machine, and now when I returned it, this started to happen. 1) Already selected. 2) Good point.

Yes, tried 2 Power Supply, Corsair RM850x 80Plus Gold and CoolerMaster MWE 750 80Plus Bronze.

still get the motherboard beeps and already clearing CMOS.

I don't know what else to do, when I connect my Gigabyte Vega 56 OC Gaming 8GB, the motherboard gives 5 beeps and no video, and I tested it with another GPU (GTX 750) the same thing happens. When I remove the GPU and boot from the iGPU, it works fine. I changed the PSU and it still happens.

Yes, When I remove the dgpu the igpu works again.