Recent content by latinx

There's no new kexts needed. Again, it's best to just use the SSDT and avoid having to keep up with all the KextsToPatches. It gets annoying really fast. Thank you for your Help :-) i fixed it with the uia_exclude=" in config.plist > Boot > Custom Flags

I will check the Custom Flags thanks, but a question normally with the 15 port limit KextsToPatch all port should come out like when I boot in High Sierra with the same config.plist or I'm missing any Kext in Mojave. ?

here is the config.plist. thanks

I use the SSDT + the USBInjectAll.kext but it does not work the USB ports SS0 are not showing up.

Hi pastrychef, first of all thank you for your guide it is very helpful. i built my first hackintosh and i have use your EFI folder. Components Asus ROG Strix Z370-G Gaming (WI-FI AC) ( Wifi I will update later ) Intel i7-8700K Processor CORSAIR Hydro Series H115i PRO RGB CPU G.Skill Trident Z...

Thank you.. I will do all this changes

Problem Reporting files are attached

Hi RehabMan, I found out the only after I put the laptop to sleep for a few minute the backlight control work. Maybe you know what can be done to fix this? Thank You

when i turn it to the end the screen turns black. I have tray my first installation for some weeks with Sierra 10.12.6 in the backlight control work..

Hi Rehabman, have the slider for brightness but when I move it does not change anything

"Problem Reporting" files attached

I have read the complete guide and i use the indicated information If Clover can automatically detect your EDID, the easy fix is to change your config.plist such that Clover automatically injects a custom EDID with patched product-id. The product-id known to work is 0x9c7c. Just set...

Which part from post #1. ? I use this.. - a single pre-built AppleBacklightInjector.kext - a patch for AppleBacklight in config.plist/KernelAndKextPatches/KextsToPatch - SSDT-PNLF.aml to activate the AppleBacklight kext my screen looks like this one attached

Hi RehabMan, Sorry I'm pretty new at hackintosh i have read a lot in the forum but I do not really understand what you mean with EDID product ID spoof. Can you please be more specific which part from post #1. have to try ? I have already tray the patched EDID in Clover To fix it. but without...

Hi RehabMan I have patch my EDID with the 0x9c7 but it does not work. thank you for your reply