Recent content by Kraveylicious

thank you for this! I changed my SMBIOS from macmini_6,1 to imac_13,2 a few months back and kept the serial number and smUUID from the macmini SMBIOS so I wouldn't have to set up Messages and my Apple ID again. Since then, I'd had kernel panics when waking from sleep and was unable to load...

I didn’t think these machines supported booting from NVMe. I’ve tried installing the OS one and couldn’t get the system to see it at boot.

Did this end up working for you? I'm having the same issue and ended up using the old SSDT-HP.aml from the guide before the revision, which has me up and running.

Did you ever find a resolution to this? I just bought an RNX-1300PCE card thinking it would work, but on 10.15.2 I can't get it to get recognized. I've tried AirportBrcmFixup in /L/E/ and get kernel panics on boot, and putting it in kexts > other doesn't seem to do anything.

I've got a Rosewill RNX-AC1300PCE wifi card installed and it only works with the AirportBrcmFixup kext (installed in kexts > other and /L/E). Only issue that I've run into with both of these is that Unlock with Apple Watch never seems to work. It'll turn on the setting in System Prefs, but will...

I ended up setting up the HP with Xpenology since it's just going to be a file server, rather than try to figure out graphics support and purchase additional hardware. I appreciate the help @trs96 !

Well I gave it a shot. I didn't think about how the full height RX560 wouldn't fit in the SFF case even with the side panel off. But I tried it without the dGPU and discovered that when setting up the BIOS according to the guide, turning off Legacy Support gives weird graphical issues where the...

I understand that HD2500 graphics aren’t supported. Is it possible though to use this guide with an I5-3470 with HD2500 if it will only be used headless? Or does no support for that IGPU just flat out mean it won’t install/boot? I’m thinking of putting one together (8300 SFF, I5-3470, no dGPU)...

I didn't do a clean install of Catalina but rather an in-place upgrade from Mojave using the old guide. I'm on r5100 currently. Here's the missing memory driver and screenshots of my EFI folders. I actually just noticed that HFSPlus is only in the BIOS folder, not UEFI although I haven't had any...

I had read somewhere on these forums that the purple lines are a side effect of having an AMD GPU. I get the purple lines as well (still on 10.14.6 at the moment) and I have an RX 560. Do you happen to have an AMD card in your hack?

I was able to update without issues. Only things I did to prepare were to: Make a backup of the whole system, including the EFI folder. Make sure Clover was updated (open Clover Configurator > Install/Update Clover). Be sure to checkmark everything in the updated guide. If you're updating to...

thanks for the help. When I enable the HD4000, I get stuck in a boot loop just before the login screen. I have my single monitor connected to the dGPU, nothing connected to the onboard graphics. As soon as I disable the iGPU, I'm able to boot again.

Is it possible to enable both the HD4000 iGPU and a discrete card? I have an RX 560 and an i7-3770, but with the iGPU disabled, I loose Quick Sync for h.264 decoding. I'd only like this for watching Netflix using Safari which requires Quick Sync to play 1080p. I know I can just use Chrome...

I've had this same issue with a 3.5" 6TB WD Green formatted as a single partition as exFAT as well as erased and formatted as a single partition as HFS+. Hack will hang and won't post if the drive is in an external enclosure and connected before the computer is past the Clover Bootloader. Once...

I just picked up an MSI RX 560 4GB. Can I just pop this into my 8300 CMT that’s already successfully been turned into a Hackintosh using this guide, do I need to do the whole installation over again, or are there just some bios tweaks I need to make? Sorry if this has already been covered. Thanks!