Contribute
Register

Recent content by kDawg

  1. kDawg

    [Success] BoomR's 360/VR Production Build > GA-Z170X-DESIGNARE - i7 6700K - NVIDIA GTX 970

    I have my ports limited to 14 because I chose to disable the two internal USB 1.0 headers. The math simply ends up at 14. You can use my DSDT as long as you have the same board and version and can live with the disabled internal headers. Or you can simply choose which ports you'd like and...
  2. kDawg

    List of video cards that don't require injection?

    Has anyone compiled a list of graphics cards that don't require injection at all? i.e. (GraphicsEnabler=no) I have two Kepler cards that require no injection or use of Nvidia's alternate drivers. GTX 660Ti using a GK104 chip GT 640 using a GK107 chip Here's one thread speaking about the topic...
  3. kDawg

    [Success] BoomR's 360/VR Production Build > GA-Z170X-DESIGNARE - i7 6700K - NVIDIA GTX 970

    OK I figured out the start on mouse/keyboard problem. If you enable ErP in Bios, the booting on mouse/keyboard action will stop–however I also think Wake On Lan will also stop working. I'll need to test this but at least I can shut down the computer down without it waking it every time I...
  4. kDawg

    GIGABYTE GA-Z170X-Designare

    Not sure if this will help people in this thread. I have the same board and I've attached my DSDT files there. My setup works almost flawlessly. See my comments. I'm using the F21 bios...
  5. kDawg

    [Success] BoomR's 360/VR Production Build > GA-Z170X-DESIGNARE - i7 6700K - NVIDIA GTX 970

    Good questions. Audio appears to work but I don't have a full surround or optical hooked up to it to be 100% sure. All input and outputs appear in System Preferences. I do know line out works. By FW I assume you mean Firewire? There aren't any firewire ports so I don't have that problem...
  6. kDawg

    [Success] BoomR's 360/VR Production Build > GA-Z170X-DESIGNARE - i7 6700K - NVIDIA GTX 970

    For those interested in getting wake-from-sleep to work here are my DSDT patches and config file. I'll post more details on my build but as I mentioned they're pretty similar to BoomR's. I'll also try and reference the tutorials for each of the following fixes. NOTABLE ADDITIONS I remapped the...
  7. kDawg

    [Success] BoomR's 360/VR Production Build > GA-Z170X-DESIGNARE - i7 6700K - NVIDIA GTX 970

    I'll try and detail my setup sometime this week. I've been meaning to add my own tutorial but haven't got around to it. It's not too far off from BoomR's.
  8. kDawg

    [Success] BoomR's 360/VR Production Build > GA-Z170X-DESIGNARE - i7 6700K - NVIDIA GTX 970

    Hey BoomR, I have a practically identical setup. My recommendation for your fan question is to keep the pump header (OPT) set to "Full-Speed". Then keep the CPU header at "Normal". If you want more aggressive settings you can try manual but my experience with manual Smart Fan settings has not...
  9. kDawg

    Please help me with my first hackintosh on GA-Z170X-DESIGNARE

    My guess is the NVMe SSD drive. You can get the EVO drive working but if this is your first build I would suggest using a standard SATA SSD.
  10. kDawg

    Small size build with Thin Mini-ITX Asus H81T mainboard (very simple installation)

    I think it should be added to the Buyer's Guide.
  11. kDawg

    Making NEC USB 3.0 Card Fully Comportable with Original MAC Drivers [CalDigit, LaCie, Oyen]

    Here is a ioreg dump of the MacBook Pro 10,1 as well as the ACPI tables. https://dl.dropbox.com/u/25416053/rMBP%20ACPI%20Tables%2BIOReg.zip
  12. kDawg

    Making NEC USB 3.0 Card Fully Comportable with Original MAC Drivers [CalDigit, LaCie, Oyen]

    Going to try VendorID: 8086 / DeviceID: 1E31 taken from a Mid 2012 MacBook Pro 10,1. Update: …wait this would be Intel's 7 Series USB3 chip. I think I need a little more research before I pull the trigger.
  13. kDawg

    Making NEC USB 3.0 Card Fully Comportable with Original MAC Drivers [CalDigit, LaCie, Oyen]

    So what you're saying is that if your MOBOs USB3 chip is supported by Apple's driver natively I can just use Apple's Vendor and Device ID to flash? Skipping CalDigit or LaCie's driver all together? If so do you know the Vendor and Device ID for Apple?
  14. kDawg

    Building a CustoMac: CustoMac Mini 2012

    Article: Building a CustoMac: CustoMac Mini 2012 I wonder how well this IR receiver would work. No home HTPC would be complete with out a remote. http://www.newegg.com/Product/Product.aspx?Item=N82E16811999191
Top