Recent content by karterilla

Hello still no go for me and sorry for late answers. I'm keep using 10.13.3. No HDMI since I do not have an HDMI display but a 23" Dell DP one, so cannot test it but I'm pretty sure looking at Rehabman configs you can solve this one. For audio I'm using Kirabcec conf and using only internal...

Thanks. No way already tried any possibile SMBIOS config. For me it is not that one the problem. Again in 10.13.3 using different type of Mac still working with no problem. The sooner I upgrade to .4 make the thing going crazy. Last thing I need to test is upgrading from Clover 44.20 to the...

Hello here my config. I'm on a ASRock SuperCarrier (https://www.asrock.com/support/index.us.asp?Model=supercarrier) with TB3 built-in. I'm on HS 10.13.4. I'm also using a CalDigit TS3 station based on Alpine . I can use almost all the ports that the CalDigit sports with no problem. I do have...

Hello zaa.forum I do have an HD 630 in a Dell Optiplex 3050 desktop with all the setting and kexts required or suggested here. Mine sports 1536 MB and QE/CI are working. No way: the sooner rebooting after the upgrade to 10.13.4 I get flashing and dancing screen, non refresh, no way to use the...

Hello, is a Quadro K620 supported by this update? I've installed with not problem on 10.13.4 on a Dell workstation whit this card but in NVIDIA Drive Manager PrefPane, ECC tab, all slots are empty (No Device Found Empty) but naturally I'm using it. Clover config has the correct stuff...

Means it is not working: no status changing plugging or unplugging no charging or discharging values are changed, no sleep as if power cord attached while on batteries, etc. Until I change something in Energy SP pane: than it start working. Thanks

Hi RehabMan. If you can give a clue on my test please. Tested on debug kext. What is happening is this. On boot the batteries check does not start. I need to "force" it to wake/start working. Even with power unplugged at boot the status % remain always at 100 (or whatever it is) and only playing...

Will do. I'm already using the debug versione of your kext. Also I've booted from an external (fresh) Sierra (10.12.6) and it is acting the same. Once you start touching something about batteries it starts: seems it need something to "activate" the battery and from that point on seems to act as...

Yes it is not working but I think is something to do with updating the status in menu bar. If I unplug the charger, status think it is still charging, no screen dimming, no sleep, nothing. Unplugged no sign of discharging. But if I do open the Energy saver in SP and I touch anything in there...

Thank you. Moved to HFS+, moved everything away from Clover kext and all in /L/E, but still no luck. Now no changes if I disconnect plug always think it under charge. What I'm missing?

Thanks. I did suppose you were telling me this. But if I do install FakeSMC in LE no boot, and keeping a copy of it in CKO (and one in LE), no keyboard (with your PS2) and no more I2C TP. Can be APFS+? Will move the rest of them. Will try to do a fresh installation on HFS+J. Can you confirm...

Hello RehabMan. I'm working on a Dell Latitude 7280 (i5-6300 Skylake but with a similar Kabylake BIOS). 10.13.3 latest. I've followed this guide or at least I think I did. Found an ECOR OperationRegion with embeddedcontrol, just one, applied "Fix Mutex with non-zero SyncLevel", and operating...

Thank you this is real useful. Yes I have a SMBIOS set to a MacBook Air (13-inch, Mid 2013) (not all fields anyway filled, if this make any difference). I do indeed need to work on battery: I noticed now that sometime disconnecting power supply does not switch to a dimmed display and naturally...

To be very honest do not know where it is! Naturally when the TP was not working didn't touch anything and in SP was not showing (as now where it keep saying searching with the spinning thing going). There is a way to reset it? Or replace it with vanilla one? Thanks

OK thank you. Tried to boot many many times with no luck. I've played bit taking away for example original Apple I2C kext (and even satellite VoodooI2CHID.kext but that is breaking the TP to works). I've checked the logs but there is no trace of propane: is there a way to understand from logs...