I'm using 10.11.3 and happy with it to do my coloring video work... thought couple of times to update OS, it is very good to know tricks to do it, thanks a lot Gigamaxx I will consider your tip.
Regarding my clover booting configuration... is it fine for you? do i miss something to avoid booting...
Thanks Gigamaxx, I'm still stuck at the issue. My clover version is 4.27... maybe upgrading clover will solve the issue?
By other side... looks like my configuration is fine as the attached pic... or it isn't??
Ok, I found why... apparently i plugged the usb cables (keyboard, tablet and USB hub) in different ports than before. I guess machine likes the new apartment but not new USB ports o_O
Thanks Vulgo, I don't really know where to change these details... Clover Options?
The machine was working fine but I moved to another apartment so I set up the equipment in the new place and first time booting I got this kernel panic. I thought it could be a hardware issue but it is obvious...
Hello, anyone knowing how to solve the kernel panic attached pic?
I've got a back up with Carbon Copy but wondering if there is any other way to solve the issue
Thanks in advanced!!
C
Hello Guys, recently I had an issue with my Hackpro (EL Capitan) and couldn't start up, there was light in the motherboard but system not initiating. After research I started up replacing the internal battery and machine boot up nicely but just the BIOS config had two changes from my latest...
Hello Guys, recently I had an issue with my Hackpro (EL Capitan) and couldn't start up, there was light in the motherboard but system not initiating. After research I started up replacing the internal battery and machine boot up nicely but just the BIOS config had two changes from my latest...
Hello guys, I got it :thumbup:
Both GPUs working and recognized by Resolve. I fix the decklink in last slot modifying settings in Bios:
1- I lost all USB 3 connectors from the back of the tower just one working on the front... Is there anyway to make them work even the manual of the...
Hello Adrian, regarding my previous post don't you see some light at the end of the tunnel? :thumbup:
Thanks CRND, that's what I thought but there are some cables and the power supply to close to the slot and the 760 is too big, the GPU should be thiner or I need more space in the bottom...
Yes, but the exact specs for the video card says: 'Computer Interface PCI Express 4 lane generation 1, compatible with 4,8 and 16 lane PCIe Slots'
It means that I can set the bios to activate 3 slot... As I checked you can configure it but the maximum speed you can add id x4 and will disable...
It appeares the BIOS interface as it can not boot as usual so it fails to boot. I haven't tried to reconfigure the BIOS... I'm stuck and I son't know what steps I should do to reconfigure it... Any idea?
The left slots are two small for the GPUs and the Decklink Video card, they don't fit...
Well, using more than one GPU helps Davinci processing the images specially working with 4k raw footage and I am using two monitors for more UI space... it's also more pro.
Anyways, I just posted in my previous post what I have tried with both of them... what do you think?
Hello Guys, so I went to get the Titan X and this is what I did:
First Try: I plugged both cards and move the Decklink SDI 4k to the last slot and the computer went straight to the BIOS when I turned on... it didn't work. Here is the picture (image 1)
Second Try: I removed the 760 and...
Yes, I would try first both of them... if it doesn-t work I will replace the 760 and plug in only the Titan and see what happen :thumbup:
Any case I think I should buy the Titan X because it will work better than the 760 for my work and rebuild the system if needed, right?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.