Maybe they fixed it in newer rev's of Gigabyte boards, I know that the Haswell (Z/H87/97) boards have a few weird things with the UEFI firmware since it was the second year that they had generally switched from BIOS to UEFI.
Been installing Windows as UEFI for two years now. Once I boot into Windows and disable the HD 4600 in Device Manager it works just fine. If it is enabled I have to boot using the Windows Boot Manager entry in my BIOS (Gigabyte).
I list this as an option to fix as well if anyone wants to leave their iGPUs disabled.
@pastrychef Another one of the reasons I posted this was for my note at the bottom, as I had to figure out that step on my own and it involved multiple wipes and reloads... Hopefully my bit about...
I didn't find much about this issue on the internet (and this information would have saved me a lot of reimaging due to my dual boot setup), but there are two fixes to this problem that appears to be new with 10.14 Mojave. With this issue, any JPEG will not open in Preview or Quick Look. The...
I had pretty current gen Macs at the time I built my first Hackintosh. I had a MacBook Pro 2011 13", my family had some white MacBooks, and we had a 2007 20" Aluminum iMac. However, I wanted to get into PC building. I built my first PC and tried to Hackintosh it, but I had obscenely long boot...
Hi ersterhernd,
Quick question: Do you know if there is any significant size difference between the D34010WYK1 and the DC3217BY?
Looked, but can't find dimensions online.
Thanks.
I noticed that with iStat Menus, it only shows my drive temperatures. I looked for a way to install HWSensors to the EFI partition but could not find a way. Has anyone here found success with installing all the HWSensors to the EFI partition?
Three questions about the iMac G4 neck:
1. My display is very loose, if opening up the base and tightening the screws near the vent doesn't work, would buying a replacement neck fix the issue?
2. Would buying an extra neck be worth it just in case of a failure or something? I found one for just...
Hi, I have a question about the LCD wiring, now that you put in the edit. Is it still necessary to order a second iMac G4 neck if I don't want to do any splicing, or does this method fix that? Thanks.
OK, thank you. Could I PM you about a Google Sheet I want to share? It is my parts list with rough prices (taxes+shipping slightly inaccurate) and I don't want to enable editing for anyone with the link. For now, I have enabled viewing...
I guess, it was just that the rest were 1/x, so I thought maybe you made a typo. Where should I buy shrink tubing from? I want to make sure I get high quality parts for this mod, as I want to minimize all possible causes for failure.
Thank you, will make sure to thank minihack when I start my own thread. Is there anything I could possibly subtract from my Pololu cart? This will be the only mod I ever do, so I don't need so many spares.
Parts list you posted a while ago is attached for convenience. Thanks for all your help!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.