Recent content by Jimran

The NF-B8 / NF-B9 have only different windig

You’re welcome! I did tested also a combination of G5 original stator + Arctic F9 fan pcb. Still not tested rpms etc. but it works))) On foto 3 u can see Arctic F9 pcb + orig G5 stator, complete orig. G5 stator, Arctic F9 stator and Noctua B9 stator.

Very good! If you have B9-Redux (you can also use B8-Redux = the same size of stator, only difference in rpm of fan models) you can easily mod your g5-fan with it: 1) Pull out the fan blades [no need to drill] 2) Use a gas wrench or large pliers to pull out the stator. But do not forget to...

The Noctua don't need be drilling to get the fan blades off but by Arctic F8/F9 we have another "story". Having a good experience in disassembling fans, out of 20 Arctic fans I killed 4. The problem is not to remove the propeller itself (you have to drill it by Arctic]), the problem is that the...

Glad to be helpful. You're wellcome

I mean, that the Noctua fan can simply be pulled out, without any drilling. But with the Arctic F8/F9 it was HORROR))) Out of 20 fans, I broke 4)))) The problem is that the plastic axle on which the stator is mounted is manufactured in one piece. When trying to knock the plastic axle out of the...

It was necessary to post in section for G5

You could just pull it out by pulling hard, there is no need to drill anything. If you read about this on a German hachintosh-forum, it was me)) I did it also with Arctic F8 and F9, but it was not so easy like Noctua.

@Heyselcuk thanx for your feedback! This is the part of that HDD-tray system: Mac Pro dual SSD Bay 3.5 Inch to dual 2.5 Inch custom Adapter for Hackintosh Mod Dimensions: 118 x 104 x 25 mm Weight: 214g Material: Aluminium Designed and manufactured in Austria ©2020 InTheKitchen Technologies Ltd)))

@Figaro Wellcome, glad to share with you)) Thanx for your feedback! Yes, I drilled every hole and used a piece of G5 grill as a template.

Power Mac Pro Hybrid))

EVGA SuperNova 750 G2

@dasboot5 I also somehow thought about these PSUs BUT: 1) The cooling fins of this radiator must be "open / free" to cool. And if you put it into some housing like from G5 PSU (so close) it will be not an efficiently cooling I thought.. 2) And these PSUs are only 300-500W, and I wollte to have...

@slv335i thank you! Glad to share)

Full modular SF-1000P14PE G5 PSU Mod