Recent content by janoyago

Used the older Probook Installer nothing i'm in the same place. Any ideas? Thanks

Hi, while playing a 3d game the battery of my laptop (Elitebook 8460p ATI graphics) drained the batery and suddenly shutted down. After pluggin it the system did not loaded anymore. Reinstalled Yosemite with Clover UEFI and now it startsup only in safe boot. Attached verbose screen where it...

I found out something. Actually there is a Elitebook 8460p that runs exactly the Radeon HD6470M that CPU-ID is repporting, HWININFO64 also report it. I found out this article that confirms what i think. Also the ATI card is conected via PCI, so that's why serial looks enabled on Yosemite verbose...

As Suggested I runned CPU-Z and foun out that it is running an ATI Radeon as graphics! Let me know if this machine would run Yosemite at all.:banghead:

I already read post #1 a hundred times. serial port is disabled look at the picture of the bios setup. Is there a turnaround to disable serial via command line? To recap: elitebook 8460p, core i5 HD3000, 1600x900 resolution updated to the latest bios version: v61 config.plist used: HD3000...

MDC card removed. Same result can´t boot to yosemite installer To recap: elitebook 8460p, core i5 HD3000, 1600x900 resolution updated to the latest bios version: v61 config.plist used: HD3000 1600x900+ blackscreen able to boot Windows and Ubuntu serial port disabled According to the guide...

- fixed to 8 digits - Serial port disabled Same result and another detail the first elitebook model didn´t had a MDC card. This Elitebook does. Might this device affect boot? http://www.primelec.com/hp-elitebook-probook-56k-v92-mdc-modem-module-628824-001#.VhITcKStEfo

- Ok did all the process again. config.plist corresponds to "HD3000 1600x900+ blackscreen" file. - sending new EFI folder and verbose screen Thanks for your help.

Its 1600x900

There you go.

Did tryed set a different ID. as you suggested. nothing. I mean the same thing hapens. Note that Windows and Ubuntu run well on this machine. and that I tryed two differet usb keys. What can I do?

Hi after I installed to the latest BIOS v61 for this machine (elitebook8460p) i've been trying to install yosemite from zero. Meaning that SSD has an empty partition (hfs journaled). I noticed that this other computer is 1600x900 resolution instead of the 1366x768 of the previous 8460p I´ve had...

Dose this mean to erase the EFI partition files from the SSD? When the EFI partition it´s created on the destination disk?

Apple boot screen: progress bar stops at the middle I´ve bought a used Elitebook 8460p, Core i5, HD3000, from a used computers store. They gave 3 month warranty witch I thought was a good deal. I´ve also bought a 120GB Kingston SSD Drive to use as boot disk I've succefully installed Yosemite on...