Recent content by jamesdstark

Does anyone else have USB ports that stop working after a while? My USB keyboard stops working after a while. All my USB ports worked right after my 10.11 install. I've spent hours and hours trying all these things to fix USB and nothing has made any effect whatsoever. My USB mouse starts...

Never mind, multibeast installed them to /Library/Extensions also.

Why does FakePCIID_XHCIMux still show in IOREG after I deleted the kext from S/L/E? It's not in clover either. This shows in kextstat: 46 0 0xffffff7f8105b000 0x3000 0x3000 org.rehabman.driver.FakePCIID.XHCIMux (1.2.4) D0E14B13-055E-3D25-9998-6A5D3589FDE8 <45 12 7 5 4 3 1>

Ok I remade it and the injector is working now, the only ports in IOREG are the ones in my SSDT-UIAC. I tested all my ports with USB2 & USB3 devices: USB3 connected on SSP1-SSP6 USB2 connected on HP11-HP18 Some of these overlap the actual plugs, for example HP15 is the same plug as SSP5...

Ok I've got the right EFI partition now. I checked the clover boot log and it says the DSDT and SSDT patched. However IOREG still shows the ports HP12-HP15 I removed from SSDT-UIAC.aml, so I still must be doing something wrong. I tried a USB 3.0 thumb drive in all USB ports and it only connected...

I'm doing something wrong. I edited SDT-UIAC.aml to include only ports relevant to my device, and I also deleted HP12-HP15. However those ports still show in IOREG after reboot. Do I have to create a custom DSDT for this patch to apply? I have SSDT-UIAC.aml in the clover config.plist under...

I can see them in IOService, not sure how to identify the ports. I tried by "Port" such as <01 00 00 00> which is under HP11@1d110000 that one of my USB devices is under. Does that translate to this port under 8086_8xxx? "8086_8xxx", Package (0x04) {...

In my IOREG none of my USB devices show under IOACPIPlane. They show under IOUSB, is that where I am supposed to be looking to identify which ports to keep, by the "PortNum" value?

Thanks, I just realized I'm in the wrong forum, I have a series 9 desktop not a laptop. I read you are supposed to be able to just install FakePCIID.kext and FakePCIID_XHCIMux.kext to get it working but my USB devices eventually fail unless I replug or reboot.

Thanks that is fixed now per attached. I think what is left is to make a custom port injector somehow?

I've installed this kext now. When I try to save as AML I get these errors on line 37: 7/6/16, 2:40:44 PM, iASLSuLexC.dsl(37) : error 6126 - Invalid character (0x21), expecting ASL keyword or name 7/6/16, 2:40:44 PM, iASLSuLexC.dsl(37) : error 6126 - Invalid character (0x3D), expecting...

My USB keyboard eventually stops working and have other USB problems, this seems like the fix I need. I've spent many hours with these instructions but I still feel lost like I don't know what I'm doing. Choosing correct BIOS options - I've done this everything is set to enable/auto Renaming...

Worked perfectly in no time at all. Thanks so much for making this script and instructions.

You aren't running 4k. DVI-D is 2560x1600 max. SwitchresX is scaling the desktop, that's what it does when you use a resolution greater than native.

Thanks for this guide, I followed it verbatim and it solved the problem of my SSD not booting after multibeast install.