I have a similar issue, not sure why. Updated to 12.4 and latest OC0.8 went OK. Now i did a reset NVM ram, hopefully it will help. It randomly locked up, for example when going into the appstore.
Hi,
i'm curious, is there anyone who has 2 displays connected to a Brix 4570R?
Montgomerey is working just fine.
I've connected 1 screen to hdmi and it works ok.
A 2nd I've connected to miniDisplay port (miniDisplay port to hdmi cable).
On win10 it is not detected which is strange because...
Before updating I first test the OC0.73 to 0.74 with an USB stick. I noticed that OC0.74 still with BigSur looks like it hanging at Apple Logo. So maybe it's something with OC0.74 and up? Question to be sure, can the update be done with OC0.73 in place?
I can confirm that Mieze's latest update to Realtek8111.kexts 2.4.0d0 as of april 2021 available on InsanelyMac does work out of the box. Did not have to erase cache. So she did a perfect job adjusting and changing the script. Kudos to her! (wish I had the knowledge to that :) )
I thought OC0.6.6 or 0.6.7 was mandatory?
You're sure you have OC 0.6.3 running, and if so I could update with OC 0.6.4 running? (as a higher OC version rejects correct running of Realtek8111.kext either 2.2.2, 2.3.0, 2.4.0, so no internet)
Thanks!
Anyone success with OC0.6.7?
I can boot, but none of the Realtek8111.kexst are working. 2.2.2, 2.3.0, 2.4.0 all give no Internet although it seems they get loaded.
OC0.6.4 is still working ok with Internet but then I can't update BigSur to the latest version.
So I did get to manage to get the Linux entry back, it's written in Acidentera's multiboot section. You can add a key to the config.plist.
Also tried OC 0.6.7 It boots, but no internet with Realtek8111.kexts 2.4.0 or 2.3.0 or 2.2.2.
Note that 2.3.0 and 2.4.0 also don't work for me with OC0.6.4...
Hi,
except sound and WiFi and missing Linux Ubuntu in the picker, most other things where working with OC0.6.4.
Wanted to update BigSur to the latest, so updating OC was needed.
Updated all kexts of course.
With OC0.6.6 booted OK but no LAN, missing the Win10 in the picker.
OpenCanopy things...
Just wanted to share my OpenCore 0.6.4 EFI for people with Gigabyte BRIX R4570. Please fill in your own serial and SMBIOS. Just no sound with ALC269 still. If you have a solution to get audio on Headphone output it would be great, thanks!
-No audio on Headphone output, did not check HDMI audio...
Thanks, will look into that.
update 1: Yes just adding the resources was enough to get the drive graphics back.
checked the config.plist and compared with the one on the ssd (0.6.3) on boot keys, these seem to be the same. So have to look a bit further i guess.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.