Recent content by Gymnae

On my Lenovo Thinkpad x250 I have the same problem: Bluetooth works fine when AC is attached, but without AC on battery no Bluetooth hardware is available. I have in /L/E/ - BrcmFirmwareData - BrcmPatchRAM2

I have problems with this website not working properly, so I hope I can answer this time. @canyondust: I tried AptioMemoryFix.efi and I'm also running it now, but it alone did not help. @aberracus: Sound works for me when using the latest FakePCIID.kext, FakePCIID_Intel_HDMI_Audio.kext and then...

This website is super slow for me once logged in, even replies get lost in the process of posting. I'll try again: At the moment I'm testing ssd hotpatching for removing the _PWR function from the dsdt and it seems to work. Rehabman offers an extensive guide for hotpatching. That means that...

Update: Made it work by adding RC scripts and EmuVariableUefi-64.efi via the Clover installer. It also required more DSDT edits.

Yes, in BIOS 64MB works. More breaks the boot process of MacOS. I'm getting closer to fix the sleep problem, I think it's NVRAM, which needs to be emulated for either H370 systems or my Gigabyte board. For now sleep works if I emulate NVRAM.

I'm using an Gigabyte H370 D3H rev 1.0 and also have problems with sleep. It takes forever for the system to "fall" asleep One in three times it stays asleep Two out of three times it reboots immediately after appearing to have fallen asleep One out three times when it sleeps properly and...

I am the other guy :) Sleep is being super weird, sometimes it works, sometimes it reboots... I'm losing my mind over this Regarding DVMT Pre-Alloc: I cannot set it to higher than 64MB, but iGPU still works and I can enter 10.13 with only the iGPU running - without the DVMT Fixup kext.

Thanks to your guide, I was able to create a DSDT that enables (at least so far) proper sleep on my system. I used the following patches: Shutdown Fix v2 Fix _WAK Arg0 v2 Shutdown restart (might not be needed) USB3 _PRW 0x6D Skylake (instant wake) Manually copied the patched _PRW method of...

I tried darkwake=0,4,10 and fixshutdown_004 is active in my current config.plist It's random: Sometimes it sleeps properly and wakes up properly, sometimes it reboots immediatly, sometimes it wakes up and reboots after 10 seconds.

You are correct, so I carried on. Unfortunately, the mere 10.13-Coffee_Audio_Controller patch for config.plist did not enable a Codec, but rehabman's FakePCIID.kext & FakePCIID_Intel_HDMI_Audio.kext did. I installed them to /L/E instead of C/kexts/others, then sleep worked for a bit (I won't...

Update: I have identified FakePCIID.kext in combination with FakePCIID_Intel_HDMI_Audio.kext to be the culprit for missing sleep. If add those two, I have working sound, but then the system wakes itself up immediately after falling asleep, which takes 30seconds to 1minute.

That I cannot answer. The ioreg file has a HDEF@1F,3 device. This is the state I have when having the plist patch for 300 series in place. The missing codec also makes your audio_cloverALC-130_v0.5 deny running since no audio codec is found. How else could I create meaningful data to debug the...

I have an H370 based motherboard with an 887 codec. I tried 10.13 coffee audio plist patch and the linked SSDTs SSDT-HDEF-HDAS-1.aml (but not at the same time) Result: HDEF appears as device, but no codec is installed, so the audio_cloverALC-130 refused to install. Sleep works in this...

moved to https://www.tonymacx86.com/threads/no-audio-devices-applehda-realtek-audio.234729/page-76#post-1745814

I'm build a new hack based on some new components: Gigabyte H370 D3H Rev. 1.0 Bios F2 Intel i5 8400 Nvidia GeForce GTX 1080 16 GB RAM w/o XMP profile MacOS 10.13.4 incl. security patch Thanks to Clover and the chosen Hardware, getting the basics right wasn't really complicated. I have a...