Recent content by gdubduc

  1. gdubduc

    Crash on wake with second monitor plugged in- Gigabyte HD 6870 1GB

    OK, more testing. I'm only pulling 225 watts at the most through the PSU with the CPU at 100%. I have a 750 watt PSU. So the problem isn't there. Switching the port on the PSU where the cables from the graphics card plug in (it's modular) did nothing. Sometimes the crash on wake causes a...
  2. gdubduc

    Crash on wake with second monitor plugged in- Gigabyte HD 6870 1GB

    Does anybody have an idea on this one? I've done yet another reinstall to work out other issues now and have everything running flawlessly with the exeption of the dual monitor issue. Again, I can boot with the second monitor plugged into DP1 or DP2 just fine, I can use the monitor without any...
  3. gdubduc

    Crash on wake with second monitor plugged in- Gigabyte HD 6870 1GB

    Hi folks. I've been toying with my upgraded rig for the last few weeks and finally, though the process of elimination, figured out why I'm getting a crash-on-wake situation after I've been using the machine for a while, but not while doing the install and such. As a process, everything goes...
  4. gdubduc

    System freezes seconds after waking from sleep

    | Oct 30 00:34:35 localhost mDNSResponderHelper[944]: do_mDNSInterfaceAdvtIoctl: ioctl call SIOCGIFINFO_IN6 failed - error (22) Invalid argument I get that exact error when my machine wakes from sleep and stutters. The stutter lasts for about 30 seconds and is intermittent. I can enter a few...
  5. gdubduc

    Poor Gigabyte hd6870 performance

    OK, but that still doesn't tell me why the performance of the 6870 is almost the exact same as my HD6770. I cannot even break 35fps with either card. Ideas?
  6. gdubduc

    Poor Gigabyte hd6870 performance

    I recently purchased a gigabyte HD6870 graphics card, installed it an was immediately in business. My CustoMac recognized the card right away and loaded the Duckweed framebuffer. The only niggle with the install was that the top DVI port doesn't work, but both DP ports work so I'm relatively...
  7. gdubduc

    eSata now internal after Multibeast 3.9.0?

    Hi guys, I recently upgraded my Multibeast install to 3.9.0 and virtually everything works fine, but I've run in to this little problem with my actual eSata drives showing up as internal. It's not a huge issue, but it does mean that I can't just hit eject in Finder; I now have to unmount the...
  8. gdubduc

    Carbon Copy Cloner 3.4.1 / Chameleon conflicts

    PM me your email and I can send you a zip file with the CCC 3.3.7 installer. Garth
  9. gdubduc

    Carbon Copy Cloner 3.4.1 / Chameleon conflicts

    That's probably a different issue- you're having a problem with a cloned image not restoring as a bootable drive, and this is ONLY with CCC 3.4.1, not any previous version. My issue is that, after cloning my boot drive to another internal drive, I can't boot the computer to ANY drive. The...
  10. gdubduc

    Carbon Copy Cloner 3.4.1 / Chameleon conflicts

    Glad to hear I'm not the only one. I've reverted now, but does anyone know exactly what the new version of CCC is copying that it didn't before? Is it pulling something hidden from root or is it something hidden on the hidden formatting partition of the drive? Garth
  11. gdubduc

    Carbon Copy Cloner 3.4.1 / Chameleon conflicts

    Hi all, I encountered a weird problem over the weekend and think I have just now gotten it figured out, but need a bit of advice. On thursday, I updated my copy of Carbon Copy Cloner on my CustomMac. I have a scheduled task in CCC that clones over my OS X boot drive installation to another...
  12. gdubduc

    iStat Temp not reporting CPU temps now

    That worked. Thanks for the quick response! Garth
  13. gdubduc

    iStat Temp not reporting CPU temps now

    Hi all. I had a KP that caused a major system crash yesterday and I'm still trying to get back to 100%. The only thing left is that I cannot seem to get CPU temps out of iStat Menu 3.18. They were there yesterday before the KP. What's changed is that before I was on Multibeast 3.4 (I think)...
  14. gdubduc

    [LOCKED] Guide - New ATI Kexts from iMac 10.6.7 - 5XXX/6XXX

    Re: Guide - New ATI Kexts from MBP 10.6.7 Update - 5XXX/6XXX Same problem as both of you guys, but with the Gigabyte HD5770 (not the Batmobile card, but the 900MHz one). On reboot after installing new graphics kexts from Multibeast, I get the DVI monitor up just fine, but the Displayport...
  15. gdubduc

    Lost DisplayPort with MultiBeast 3.4

    Nevermind guys. I'm going to jump onto NotShy's post instead.
Back
Top