Recent content by fagner.sbs

I collect hardware information on windows for DSDT injection. It will be necessary? Name: DW1550 Bluetooth 4.0 LE ID Hardware: USB \ VID_413C & PID_8143 & REV_0112 Name in BIOS: \ _SB.PCI0.EHC2.RHUB.PRT1.PRT1 ID hash: AB6F9B98 Name: HD AUDIO ID Hardware: HDAUDIO \ FUNC_01 & VEN_10EC & DEV_0270...

Yes, take them all apart. Only one error between all files.

Then explain the method of extraction. I followed a description of the guide: Sometimes, Clover F4 will write duplicate SSDTs. These duplicates will cause problems during disassembly. If you run into issues (duplicate definitions) during disassembly, you will need to analyse all SSDTs to...

One Error using Disassembly with refs.txt: 280, 4096, syntax error, unexpected PARSEOP_PACKAGE Excerpt from error: Package (0x06) { 0x00000320, 0x00001157, 0x0000006E, 0x0000000A...

Please do not give up on me. Already use 5 days of 15 days of annual rest, 100% dedicated to this, night and day.

New Mojave. Improved resolution, before hd 4000 was 512MB, now 1536MB. However, the gt740m chart is posted to the system, even with nv_disble = 1. Wifi BCM94352 works fine, but bluetouth did not work even using BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext as indicated at...

This solved the initial problem. Thank you! Now open the system without panic. However disassembled units (HDMI, 1 USB, WIFI, Bluetouth). Start to install the WMM94352 Wifi drives, working fine with FakePCIID.kext and FakePCIID_Broadcom_WiFi.kext. However, the Bluetooth injection method...

Do not worry. In the guide you speak to use BCM theme. Now it's now small file with no themes.

ok. Guide: If you can't boot, a bare minimum is: - Boot verbose, attach photo - Attach EFI/Clover folder as ZIP (press F2 then F4 at main Clover screen just before collecting). Is attached. thank you.

now do not start boot, to test if it will work. following the tips. the config.plist file for HD4000 available in the guide have a lot different thing from the old rain, but I leave as explained.

how do I do this? I'm a beginner and curious. I'm not good at it, just follow the guides. Would you have a link on this that I can read? I find it strange that after you can call, almost everything works normally (except the video that did not work as it was in the saw). The rest everything 100%.

In original mojave I only replace AppleHDA.kext eIO80211Family.kext. Should I install clover again or all mojave? The installation of mojave is practically clean, only two changes in kext

Need help! It worked perfectly in Sierra, no problem. Now Mojave installed with everything working, but with some problems. Problems: Intel HD Graphics 4000 only 512 MB, malfunction of the viewing screen. When turning on the Mojave, every time it restarted 2 or 3 times in a row to only go...