Recent content by Etyel

  1. Etyel

    Blu-ray drive causes errors and very long shutdown time

    Hi etorix, I can confirm that the problem is with the power management. In my case, since Sonoma, the DVD drive was causing crashes during sleep with this information in the log "Failure during sleep: SAT0(AppleIntelPchSeriesAHCI) : Some drivers failed to handle setPowerState". When I unplugged...
  2. Etyel

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    I use SMBIOS of the MacPro 7.1 and it hasn't prevented any crashes, by the way the real MacPro 7.1 can't accommodate an internal DVD drive because of its casing. It even seems to me that no Sonoma-compatible Mac could accommodate an internal optical drive, which makes it logical, albeit a pity...
  3. Etyel

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    It's a Lite-On, IHAS124-14 I think, I'd have to take it out of the tower to be sure. I've had it since day one, and I've never complained about it. EDIT: I checked, model iHAS324-17
  4. Etyel

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    CaseySJ, I found the culprit of the crashes during the sleep since the installation of Sonoma. I started from the sleeplog and noted this line which appeared every time: "Failure during sleep: SAT0(AppleIntelPchSeriesAHCI) : Some drivers failed to handle setPowerState". This reminded me of the...
  5. Etyel

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Wake for network access is already disabled and I've had another crash since I stopped Jettison, so it's not the culprit. Before trying a reinstall from scratch, I'll see if I can't come up with another idea, as doing without Migration assistant means a very very long reinstall afterwards. I'd...
  6. Etyel

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    No Thunderbolt dock, and no Thunderbolt devices either No other external storage except those I've already unplugged I do indeed use Jettison, I quit the app to see, but I've been putting it to sleep without using it since I unplugged my external drives
  7. Etyel

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Here's what I get, I hope the explanation is there, fingers crossed.
  8. Etyel

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    - I did the update from ventura after downloading the installer, thus bypassing the update offered by System Settings. I did the same for the reinstallation. - There's only my 6800XT - And yes, I used OCLP to be able to use the wifi on my Fenvi card, as I often use AirDrop. I forgot to mention...
  9. Etyel

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Hi, I'm testing Sonoma and I'm having a very annoying problem with the sleep that I didn't have with Ventura. It involves crashes that occur during the automatic wake-ups that happen during standby. Forced to reboot, I get this message: panic(cpu 0 caller 0xffffff80073921f9): Wake transition...
  10. Etyel

    WD SN850 panic

    I also had a KP after installing this SSD in my Hackintosh. Since I updated the kexts (NvmeFix and RestrictEvents in particular) and Ventura while I was at it, I haven't had a problem in 15 days. I hope it continues
  11. Etyel

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    This is the cable that came with the monitor, I don't know if it's DP 1.4, I guess it's adapted to the capabilities of the screen (well, I hope). That said, if there are no such problems with Windows 10, it must be suitable, I guess?
  12. Etyel

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    I went to the thread you recommended. One of the ways to get all the display options could be to change SMBIOS. I tried with the one on the MacPro 7.1, figuring it must be the most versatile machine, but I didn't get any progress. I conclude that hopefully Ventura will maybe bring something. In...
  13. Etyel

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Thank you for your answer. I am currently on HDMI and don't have the VRR mentioned, I will test with a Displayport cable and report back. The monitor is a Gigabyte M32U. EDIT: I tested with a Displayport cable and it's better because I can go over 60 Hz. On the other hand, I cap at 98 Hz and I...
  14. Etyel

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Hi CaseySJ, I was wondering if you had any information on the display above 60 Hz. I recently installed an MSI 6800 XT card in my Hackintosh, but when I select the 119.88 hz (?!) frequency, I have the screen going black regularly. This stops as soon as I switch back to 60 Hz. The screen works...
  15. Etyel

    Screen goes black for 2-3 seconds

    Back after cleaning my EFI as much as possible, I still have "blackouts". In the end, I reintroduced the USBWakefixup.kext and SSDT-USBW because I need them to keep the one-touch wakeup. Edhawk, would you be willing to review my EFI and tell me if there are still things I missed, you said my...
Back
Top