Recent content by Eikeweb

  1. Eikeweb

    No Video signal after startup! Can't see BIOS...STUCK!

    Okay, so I finally got the video signal back. I had to get the RX580 from my other Hackintosh and put it in this one. Then I could get a video signal through the card and change the BIOS to use the onboard GFX as initial display. Now I can boot and see what I am doing. I finished the...
  2. Eikeweb

    No Video signal after startup! Can't see BIOS...STUCK!

    I do have a bootable USB with Mojave but cannot start from it. The Stick is working with a different Hackintosh. Unfortunately it doesn't start the monitor signal.
  3. Eikeweb

    No Video signal after startup! Can't see BIOS...STUCK!

    Hi Josh and thanks for your response. I did try different monitors but that didn't help. Also changing from DP to HDMI wasn't working. I just reseted the cmos of the motherboard but it makes no difference. After unplugging everything (incl. the hard drives) it gave me a signal and said I should...
  4. Eikeweb

    No Video signal after startup! Can't see BIOS...STUCK!

    yes, I think it does, but I cannot see it. Sometimes when I start the computer the display turns on and stays black.
  5. Eikeweb

    No Video signal after startup! Can't see BIOS...STUCK!

    Dear Friends, I had a Mojave - System (10.14.0) running but there was a problem with the display. After a while (half a year) I needed to hot plug the HDMI after the hackintosh booted into the OS to get the display without coloured lines. (Wasn't like that in the beginning.) So I decided to...
  6. Eikeweb

    Gigabyte H370M DS3H - new install, no USB

    Thanks a lot for your support! I´ll see how it compares to EFI Folder. Unfortuntately no luck with your EFI. I suppose the RX580 does the job for your display. Do you also use the IGPU? On my other hack I also run the RX580 without any issues for editing in FCPX.
  7. Eikeweb

    Gigabyte H370M DS3H - new install, no USB

    Hi Rainer, by now I managed to install Mojave. After a lot of trying it took I am now working on getting the UHD 630 from the cpu to work. I wanted to install without extra graphics card but the resolution is only 1240 and glitching. So this is the next issue I need to fix. Pretty lost again...
  8. Eikeweb

    Gigabyte H370M-D3H/i5 8400 - Only VGA is working

    ok, after a lot of hours I finally managed to install Mojave and have a running system. Now I have the same issue, that the graphics are only 1280 x 1024. The UHD 630 shows in about this Mac with 5 MB. I connect to a 4K Display via DVI cable to hdmi. I could only use the platform-id: 0x3E9B8086...
  9. Eikeweb

    Gigabyte H370M DS3H - new install, no USB

    Hi Rainer666, we have the same mobo. I installed Mojave and am stuck with the black screen issue right before the login window. Did you try Mojave? I am pretty lost now...
  10. Eikeweb

    Gigabyte H370M D3H GSM - can't reach installer

    ok, after trying a million things I was able to get 10.13.6 running. The Graphics were pretty bad but I decided to upgrade to Mojave 10.14 like a native Mac. Unfortunately I canˋt boot into the system now. It boots and passes clover menu but right befor the mac os login window the screen goes...
  11. Eikeweb

    Gigabyte H370M-D3H/i5 8400 - Only VGA is working

    Hi Geekalapomme, sorry for being unclear. I have one built running and try to do another one with these specs. I´ve been trying for two days to install either High Sierra or Mojave on the following hardware: Mobo: Gigabyte H370M D3H GSM (F.2) CPU: Intel Core i5-8600K CPU @3,6 Ghz (UHD630) RAM...
  12. Eikeweb

    Gigabyte H370M DS3H - new install, no USB

    Hi Tonarinoinu, I have almost the same hardware and can't even reach the installer. As I read more people have the same problem. Did you just follow the guide here or did you do some other magic you could share? I really am stuck at the moment and don't know what to try next. Any hint is...
  13. Eikeweb

    Gigabyte H370M D3H GSM - can't reach installer

    Hi everybody, I´ve been trying for two days to install either High Sierra or Mojave on the following hardware: Mobo: Gigabyte H370M D3H GSM (F.2) CPU: Intel Core i5-8600K CPU @3,6 Ghz RAM: Ballistik 16GB SSD: Samsung SSD 970 EVO 250GB It wasn´t possible for me to reach the installer...
  14. Eikeweb

    Gigabyte H370M-D3H/i5 8400 - Only VGA is working

    Hello Geekalapomme, I read your thread here because I have almost the exact same hardware. Unlike you I am not able to install a system at all. I have been trying for two days and never can reach the installer of the OS. I wonder what magic you didn't to reach it? Any help would be very much...
  15. Eikeweb

    RX580 and FCPX, rendering issue

    Thanks, that was an excellent advice! I followed it and it fixed my render problems instantly.
Back
Top