Recent content by den59

Thanks for your reply. Indeed, one of the port was not a part of the chipset XHC. One of the non-reacting ports started working only after I disabled all but a few HSxx ports, so I managed to figure out which number was it. I ignored the second non-reacting port on the front. IIRC due to the...

there is certainly a misunderstanding here. I refer to the first post of this thread, i.e. https://www.tonymacx86.com/threads/native-usb-2-0-usb-3-0-on-skylake.202787/ I am aware of the guide you link to, but that's not the approach I followed to have native 15 ports limit. p.s. a few link to...

My understanding was that this kext can be removed after the whole discovering procedure is done. That is, it's enough to have `USB-SSDT.aml in /EFI/CLOVER/ACPI/Patched` and a `DropTables` entry. Is it not the case? EDIT: which is also confirmed within this thread, i.e. here...

yes, I did using the OP from this thread (and of course discovering which port is which).

thanks for the link to this general guide, I did see this post. But I don't think it gives any hints as to why USB 3.0 (i.e. speed-wise) won't be working. As I said, limiting USB ports works as expected, ports are determined as HS and SS correctly. I am not using anymore `USBInjectAll.kext` or...

Thank you for the script. Worked ok for me on Z170 gaming 3k. My only problem is that despite USB 3 stick being connected as SS port, its read speed is very low (~25MB/s), whereas the same stick gives ~200MB/s read speed on MBP. Anyone can advise on where to look at?

I am going through discovery process and there is something I don't understand: I boot with HS ports only, 14 in total on my MB, but for one USB port when I insert a USB stick, neither IORegistryExplorer nor USBMap python tool show me the activated port despite macOS 10.13.6 being able to mount...

thanks, I sorted out audio. Last question: I can't mount EFI partition after the update. It was HFS+ update, so I don't use AFS. I usually mount with Clover Configurator, but neither old version I used nor the most recent one can mount EFI. UPDATE: strangely enough, EFI Mounter v3 worked. No...

You are right, @P1LGRIM . The name was of course a typo, but the location was wrong. Either way, just want to say that update to 10.13.6 (HFS+) went smooth. But the audio is gone. I think I saw in one of the replies (among 80+ pages) some links to audio issues fixes, could you give a hint? If...

I am about to update form 10.12.4 to 10.13.6 (will keep HSF+), but I don't see FakeSMS.kext neither in S/L/E nor in EFI/CLOVER/drivers64UEFI.

@VioletDragon could you please check my ioReg and clover I posted above May 14, 2017 at 11:44 AM?

I have a problem waking from sleep, no video signal: $ pmset -g log | grep -i failure 2017-05-08 06:49:17 +0200 Failure Darkwake Exit Failure during wake due to 0x34053005000032: 2017-05-08 07:05:54 +0200 Failure Darkwake Exit Failure...

yes, those patches fixed it for me, thanks for the link. p.s. to be fair, they are available only since March 2017, so your statement "it works no matter the system" is not entirely correct. I was not working untill someone invested time into figuring out what to patch.

anyone has any luck with WiFi BCM94352Z on Sierra? I installed the recommended kexts but no wifi...

I installed those 4 kexts but still don't have much luck with WiFi ;-(