Recent content by DanRamone

1) I will try to remove FakeSMC.kext, but my doubt is, since VirtualSMC.kext is already in the EFI, should I add it to Extensions folders or I just need to remove the FakeSMC.kext? 2) NiUSBTraktorKontrolX1 belongs to a dj controller, is needed. It took me now a while to figure out what the...

Unfortunately my knowledge is very limited, and I don'r really know what means "dumping" DSDT and how to explore them...I just followed guides how to install High Sierra back in 2017 with Clover, and a month ago I installed Catalina with Opencore. I could try if there is a guide somewhere...

Originally, with the USBinjectAll.kext I had 2 HS01, the one that I removed on the left USB3 port in the front panel, and the ASMedia one that u still see. So actually there is a HS01 for the Intel and a HS01 for each of the ASMedia chipset. As you can see from my last screenshot of Hackintool...

Forget to mention that the ASMedia USB3.1 with type-A connection on the back shows PRT4 with both USB2 and USB3 drives connected. The USB-C port I could only test with a Ledger device, not sure if exists USB2/USB3 differences on USB-C plugs?

Hi, the picture you posted is correct, and I'm using from the motherboard headers following ports: 1x9-pin USB2.0 header for 2 USB2 on the front panel of the case, 1x20-pin header for 2 USB3 on the front panel of the case. The USB-C header and 1x9-pin USB2 header are not connected. I cleaned...

Ohh now I see, sorry I confused you as I made the screenshot with the wrong drive on the main windows, but actually I wanted to highlight that the USB pen SCSI-LIC is actually under the internal drives. If I plug it to the nearby USB3 port connected to the USB3 header is showing up in the...

I should have done it correctly now like you said, but I still see in Disk Utility the pen drive connected to the usb2 header as internal. Is this correct? Thanks

As I mentioned in an earlier post, on the front panel of the case I have 2 USB2 connected to the USB2 header, and 2 USB3 connected to the USB3 header. To stay in the 15 port limit, I decided to have one of these USB3 not working with USB2 devices. So the front part has 2 USB2 HS11 and HS12, and...

HS11 and HS12 are the only USB ports coming from the USB2 Header, these should be Internal. SS01, SS02 should be set as USB3, while HS01 shouldn't be USB2?

Hello, I set now the ports on the front panel as internal, but if I plug an external drive to one of these ports, Disk Utility will see this device as internal disk. While when I had set them as USB2/USB3 Disk Utility was seeing them as External. So now to tell you the truth I start to be ca...

Good morning, considering that the only USB-C type of connector I have is the one on the rear of my MB, controlled by ASMedia, I have following 15 XHC ports: 8 ports for the 4 USB3 connectors on the back (4xUSB2, 4xUSB3) 2 ports for the 2 USB2 connectors on the back (2xUSB2) Then I have 4...

I used these pictures to note the numbers of the ports. I'm actually using one of the 2 USB2 headers, for the front panel of the case as it has 2 USB2 connectors, so I identified them as USB2 and not internal.

Easy :) when I told you I'm embarrassed it was because as soon as I read your question why I set the ports to internal, I've got enlightened. At that point was really quick to fix it. Thanks again for the help!

yeah...fixed, exported the file, put it into EFI, restarted. Now the external drives are seen as external and in Hackintool they are set how they should be. Thanks!

yeah I'm pretty embarrassed because I followed that guide and missed that part somehow...now everything is working! Thanks!