Recent content by dandepeched

I bought CSR8510 Bluetooth USB dongle that is working with Mac out of the box. I removed Brmc Bluetooth kexts and deleted all related .plists. Strange thing that it continue behaves exactly the same: When Wi-Fi is turned on - BT4.0 mouse cannot be connected When Wi-Fi is turned off - mouse can...

Hello, I have Broadcom BCM94352Z installed in Lenovo ThinkPad E580. With appropriate kexts both Bluetooth and Wi-Fi are working, but BT4.0 devices cannot be connected while Wi-Fi is on. If turn off Wi-Fi and then connect BT4.0 device it will work. But when turn Wi-Fi back on, BT4.0 will work...

@samtheprogram , have you succeed with resolving this issue? I've updated to Catalina in hope it will help, but no luck.

@FreeJHack, thanks! You are right, those errors are gone now. Here is the new log from wake. Sequence seems to be correct? default 11:13:23.523782 +0300 kernel ACPIDebug: { "ZWAK=", 0x3, } default 11:13:23.536614 +0300 kernel ACPIDebug: { "Calling OWAK", 0x3, } default...

Sorry for that! Debug files attached (ACPIBatteryManager.kext removed, SSDT-BAT is present)

@FreeJHack, thanks for DSDT and SSDT-BAT files. It looks like ACPIBatteryManager.kext does not work correctly when SSDT-BAT is used together with DSDT. Such errors are printed on battery status check: default 12:36:31.966930 +0300 kernel ACPI Error: default 12:36:31.966935 +0300...

@FreeJHack, thanks again! It looks like all errors are gone now, but still the same behavior is observed. I've added debug logs and this is what I see on wake with ACPI filter: default 13:48:00.356218 +0300 kernel Facs->FirmwareWakingVector: 0x2000 default 13:48:00.356226 +0300...

@FreeJHack thanks for you suggestions. Tried this, but no changes in system behavior. Fixed this I looked up in DSDT and KBD is indeed in SB. But after fixing it in SSDT, log now shows this error (no idea how to fix it further): 2019-10-10 17:52:17.626396+0300 0x71 Default 0x0...

Hi @FreeJHack, thanks for your help. Unfortunately your DSDT does not fix this problem :( From the moment I posted this topic I re-arranged my clover a little bit and now using native DSDT with hotpatches. I'm attaching actual debug info, but I do not think it will add any help for the...

Yes, you can fix this. MacOS considers this is DisplayPort, so you need to set proper port layout via Clover. This is done in Devices - Properties section. Try my configuration: <key>Properties</key> <dict> <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict>...

I want to share my Thinkpad configuration that is running smooth with most of the functionality working. Laptop Specification Tested on 20KS003AXS model with macOS Mojave (10.14.6) Not Supported Hardware Native Wi-Fi (Intel AC 3165) Discrete graphics card (ATI Radeon RX 550) Card reader...

@Feartech , I've just tried those options in the config, but they make no difference. it looks like I do not have native IOPlatformPluginFamily.kext for 10.14.6 version, as I run update after modifications and this signature error persists through this update. Maybe you can provide the native...

I found out the root cause of panic! When moving methods from DSDT to SSDT I was still referring to GFX0 device while it was renamed to IGPU. Everything works fine after replacing this thing inside SSDT-BAT.

@Feartech , yes, I modified IOPlatformPluginFamily.kext to include proper FrequencyVectors (https://github.com/Piker-Alpha/freqVectorsEdit.sh) I've used clean clover config from clover installation as a starting point. Now I've replaced it with the one recommended by Rehabman and moved my...

@Feartech , thanks for your support. I fixed kext error with LiluFriend, but all other errors saying: Kext with invalid signatured allowed: I believe this is fine and cannot be fixed? Or am I wrong?