Many thanks for your time. I'm at work and cannot verify yet, but I assume this should work.
Sorry for the bother - I thought HD5000 should follow the HD4600 procedure, although it doesn't look like so. The guide was clear already.
I really appreciate your work, please let us know if you take...
This guide is very comprehensive, which means there are quite a part of the instructions are not for you - you need to know what you have and which step you need to follow.
Maybe I can help you a bit if you can give me some details of your hardware.
I just want to say that this guide is perfectly organized and makes perfect sense.
I have successfully made a couple of installs following this guide -
Guys if you really need to watch someone's "video of doing this"..... it's probably not for you.
[Problem report: details attached] Mavericks: HDMI Audio - AppleHDA [Guide]
Hi toleda,
This is a brilliant work! thank you so much
Anyway I have to report a problem with my intel NUC install: HDMI audio is not working.
Here are the details:
---------------------------Problem...
Thank you for your comment.
Sadly, the AR5BWB222 chip is soldered on the mother board and cannot be replaced. Is there any work-around except for using a USB wifi?
Sorry for my late reply...
I have been away from this forum for a couple of weeks.
To answer your question: No you CANNOT uninstall that kext after OS X 10.9 installation. You can either put it into your chameleon bootloader kexts folder, OR put it into System\Library\Extensions. (Because this...
UPDATE:
I removed "blinkscreen"....
Finding that without blinkscreen, the brightness dosen't work properly BEFORE a sleep cycle: cannot reach maximum brightness... but still adjustble between ~40% to ~75%.. after a sleep cycle it's 40% to 100%...
Will explore more tomorrow... have to sleep...
Oh thanks for your useful and detailed explainations.. I just figured out before you post this.. THANKS!
For the blinkscreen , can I just remove "org.rehabman.blinkscreen.plist" and "blinkscreen(in usr\bin\)" and try?
OK! it worked!:thumbup: thank you again!
Please allow me to ask... is the "blinkscreen" still necessary? How can I un-install it? I just feel not quite like the dark-blink on start..
Is the nvram supposed to be saved on a harddrive?
It might be that I didn't specify a correct saving location for the nvram? The harddrive configuration is really messed up on my laptop: it has two SSDs on one chip, I disabled the RAID0 configuration and used separate harddrives for windows and...
I tried to read the nvram before and after changing backlight.
I found after reboot, the variable "backlight-level" is cleared every time (doesn't exist after boot)
When I change backlight, this variable appeared, and can be changed when I change the backlight.
here is what my nvram looks like...
Sorry for asking you spending time verifying the patch. It must be my mistake when using the patch.
Yes I tried blinkscreen. (in ProBook Installer 6.1.10) It didn't do the job. NVRAM still seemed not working on storing brightness settings (I had rebooted twice)
I had even tried...
Here is my dsdt.aml
Could you take a look whether I'm doing the HD4000 part right?
The patch just didn't work for me.
I see what you mean.. Thanks.
But it seems not my case. my brightness adjustment works without a sleep/wake cycle.
My problem is, the NVRAM doesn't restore my brightness...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.