Recent content by Corkonian

Well, frankly I have been through a lot of my random GPU stuff. I can always fit something that will make it work, but I think we are a little bit removed from the problem. If it helps, I repeat: I have run the installer, I have copied the image content to the ssd. The next step of the install...

Bump THe system finishes the first step - it copies the installation media to the SSD, but then the second step of the installer never happens. Just repeats the copy process. I have swapped the GPU for a GT1030 - same thing. I have disabld eberything but SATA, NX and Virtualisation in the BIOS -...

So I played around and in the end I swapped hardware and flipped BIOS settings until - by magic, I assume - I got the installation going. Now I am stuck at the second reboot. I have the Preboot and the MacOS in Clover and when I start the second stage of the installation, it says it will need 15...

Thanks, I will give it a try. I have done another dual Xeon build with a similar ASUS board. Went well enough with Mojave, but had regular hiccups during operation that I couldn't get rid of. This thing refuses to boot. Just stops at the 5 second break.

So yesterday this Thinkstation D20 fell into my lap. With 96 GB of RAM and dual Xeons it should be a nice Hackintosh. Should. Because it won't boot. I've switched off most BIOS options, the only remaining options are NIC and Virtualization (not IO Virtualization) but it still won't boot. I am...

Here's the config, if it helps...

Profile amended. The Crescent Bay isn't my actual Hackintosh, I still happily run on my MacBook Air and my HP 8300. But if it helps, I can amend my profile...

I run a standard installation of Catalina on a Crescent Bay Motherboard with an I7-4510U. I ran Unibeast and Multibeast with driver injection for Intel GPU and Realtek 8110 (including WhateverGreen and LILO). When booting the default, the system does not complete the boot, it hangs at the end of...

Can chime in here. Tried on a 2018 MacBook Air with Catalina. Stalls either at the end of the copy process or while writing Clover. Doesn't proceed. Doesn't write to USB either, just sits there and wastes CPU cycles. Wrote to a number of different USB sticks, SanDisk, Toshiba, NoName. After...

Same here. As I am relying on HDMI audio, I was using VoodooHDA, too. Regardless of it being "unpopular", it worked. OSX 10.14.6. broke it on all of my Hackintoshes. Unfortunately, I had just moved for about six months from my Win10 environment to Hackintosh as I wanted to get rid of the Win10...

Solved. Used wrong Clover. Clover update sped up the SSD. No clue, why, but it works now. Having a homebuilt MacMini is cool.

So I dreamt of a living room Mac. Something like a Mac Mini but - obviously - not with the price tag. So I've bought me a run-of-the-mill chinesium NUC-style computer thingy based on an i7-4500 chipset. And this thing works. Windows installs nicely and it gets me close to 3500 in Geekbench 4. If...

No luck. The PCIe card should be working as I have Bluetooth. But System Report doesn't show the WiFi and the Network App in System Preferences also doesn't show an active WiFi Interface. How can I check if the kext was properly loaded?

Edit: I'm on High Sierra, your video shows Mojave ... Followed the video. Copied the kext to a folder, copied the kext from your archive to the desktop, ran the kext installer, rebooted - no success. See attached Kext_Backup.zip Thank you

Thanks, I will give that a try.