Recent content by coolqf

Any guidance? I guessed it was iGPU related. Thanks. Anything to do with the kexts or just the config.plist? I'm absolutely stumped as to how to proceed. I've attached my config.plist.

Thanks for your response. Can you guide me to a link on how to do that? I used the OpenCore Vanilla installation guide, and have depleted all possible things that I missed. I just need a different source to help me troubleshoot this. Here's the link i've been using as a guide...

How do I interpret the attached report? After sleep, my computer always panics and I have to manually power it down and then power it back up. I'm only using an iGPU and have my monitor connected to the computer via an HDMI cable. I used clean installed with OpenCore 0.5.5. My computer...

I disabled LAN to wake and also disabled virtualization technology and the problem seem gone. Not sure if this fixed it, but maybe others care to also try? I'm running 10.10.1

Some reported on another motherboard the BIOS affecting compatibility with some USB flash under certain circumstances. I forget where. After reading that though, i updated my mobo and the problem I was having with a certain flash drive went away. I use a different mobo, but since it's the same...

For convenience (if you want) you can put the HDD in an external casing and connect it to your computer via USB.

The way Macs are structured naturally makes it more difficult for them to get a virus. Had Win8.0 volume licenses at our office... Had to reformat and reinstall the entire computer to upgrade to Win8.1... How this is more secure is beyond me...

I just reinstalled my OS X (I wanted to switch away from clover). My system setup is in my sig. Here's what I did: 1. Installed latest bios for H87N-WIFI 2.0 (F7) (reboot) 2. Restored BIOS to performance defaults 3. Enabled RAM XMP Profile 1 4. Disabled VT-d (don't make more customizations to...

I first upgraded to the latest clover (2671) and then 10.9.3 from 10.9.2. I have a MacBook Pro (2013) and the upgrade was identical and a success. The only feature I lost was the ability to connect via 5ghz on my broadcom wifi/bluetooth combo. Easy fix, reapplied the 5ghz patch, reboot, presto!

Your best bet is to google yours computer parts and see what the latest version tried on each part is. I can confirm your ram, CPU, HDD, and mobo will work with up to 10.8 (I can't speak for 10.9). The other parts... I just don't know them well enough.

Looks like you're creating new accounts. It helps if you provide ALL the hardware on your setup as well what you've installed related to the OS, such as how you installed your OS, which OS, what boot loader you're using, and what kexts you've installed. Are you using an SSDT? If you list...

The bluetooth on the Z87N-WIFI actually works, so if you want to use the USB bluetooth, it's better if you remove the combo card 1st. I personally use the AzureWave AW-CE123H. If you do end up buying this wifi, feel free to PM me and I can help you to get it working. Here's the post I used to...

After you messaged, it started working. I rebooted and it stopped working :banghead: RealtekALC.kext is in the kext folder, EFI/CLOVER/KEXTS/10.9/ I also have FAKE SMC.kext installed here.

If you list out all your computer hardware specs it would help a lot.

I'm running in UEFI on my Gigabyte motherboard and it's extremely stable, although there was a learning curve to get it running optimal...