Recent content by cnote

AMD/Nvidia Primary Display with AirPlay Mirroring on Mavericks Toleda, I would like to use airPlay Mirroring and have the boot screen too; but while my install per #1 boots without error and provides mirroring, mirroring runs very slowly with lots of lag. My results are much like Bansaku...

AMD/Nvidia Primary Display with AirPlay Mirroring on Mavericks Got mine working, and it is also "painfully slow". However, this problem went away with a workaround I stumbled onto. Your Mavericks install needs to be on P0 for this to work. The only change from this guide is a BIOS change...

I have nearly the same setup, with 10.9.1. Review Toleda's "AMD/Nividia Primary Display with AirPlay Mirroring on Mavericks" and see if it gets you where you want to go.

AMD/Nvidia Primary Display with AirPlay Mirroring on Mavericks Initial Display First was set to "PCI". After the boot fail I went back to the BIOS and Initial Display First had been changed to "AUTO". Nothing connected into HD4000.

AMD/Nvidia Primary Display with AirPlay Mirroring on Mavericks Further still. Miles to go before I sleep.... Enabled internal graphics (see attached photo), boot error (see attached photo). After crash on re-entering BIOS, the initial display first had switched from "enabled" to "auto"...

AMD/Nvidia Primary Display with AirPlay Mirroring on Mavericks Hopefully this is correct file....

AMD/Nvidia Primary Display with AirPlay Mirroring on Mavericks A little closer? Took out the duplicate and attached the IO reg file.....

AMD/Nvidia Primary Display with AirPlay Mirroring on Mavericks Toleda, Close but no Airplay, yet.... My rig: OSX 10.9.1, i5-3770k, GA-Z77X-UD5H, GTX650ti, iMac13,2, Init Display First -> PCI No DSDT; here is the boot plist: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC...

I think I have the problem & solution. When I upgraded to 10.8.5 from 10.8.4 my org.chameleon.plist file disappeared from my Extra file. I restored this file via Backup and re-ran Multibeast 5.5.2. Please note, even without this file all changes seem to have correctly been loaded. such as...

Three weeks ago my 4 month old build running ML 10.8.4 crashed. I contacted Gigabyte and they approved a return for warranty repair. Monday I got the motherboard back. Before reinstalling I called Gigabyte's warranty team and asked what had gone wrong. I was informed that the BIOS had...

Running Airplay with no glitches, easy install thanks to Toleda. http://www.tonymacx86.com/hdmi-audio/106223-ml-uefi-hdmi-audio-no-dsdt-edits.html

This was sooooooo easy, thanks Toleda! I spent an hour reading, re-reading the instructions and 15 mins on the install. No glitches, very nice indeed.

I have made a second Bios profile, for booting my "Mac Test" install using the HD4000 gfx. Upon reboot with the HDMI connector plugged into the HD4000, 10.8.4 boots successfully. As you can see from the attached both HD4000 and my GEForce 650TI are installed. I'm using a new AppleTV with the...

I have a very similar system so I will be following your thread closely; appears we would need an identical DSDT. Keep us up-to-date with your progress.

Problem fixed, not as elegant as I was hoping for. But, successful. After numerous install attempts, I booted into mac install from my unibeast USB drive and restored from my "mountain lion" install to my "mac test" drive. Everything is working properly and now I have a place to experiment...