Hello,
on my NUC5i7RYH system exits abnormally from S1/S2/S3 sleep. More specifically even if the power led turns blue (so system wakes) display doesn't show anything (black screen), usb ports are dead (ie: keyboard unresponsive) and networking never starts (icmp/tcp connections to the host...
Hello,
on my NUC5i7RYH system exits abnormally from S1/S2/S3 sleep. More specifically even if the power led turns blue (so system wakes) display doesn't show anything (black screen), usb ports are dead (ie: keyboard unresponsive) and networking never starts (icmp/tcp connections to the host...
It was con1 as expected, changing the monitor fixed the issue. Probably the EDID needs to be fixed to work properly with my Philips 273V but since it's due to my specific configuration it's definitively out of scope for this guide.
Since in Linux and Windows audio controls over HDMI works...
Hello RehabMan and always thanks for your time,
what about the abnormal "exit" from sleep? As said before the system never wake properly from S1/S2/S3.
That's definitively framebuffer-con1, anyway I tried both.
When I try to patch con1, the HDMI output is shown in sound preferences (even if...
Both are connected to two identical philips 273V monitors via hdmi, one miniHDMI->HDMI the other miniDP->HDMI.
To avoid mistakes (by me of course) i'm using only one monitor per time in the following debug.
So if I get the point (I hope I did), I modified to 1 the integer of the key...
Shame on me, after using the proper installation plist setup was done properly, but when exit from sleep (just sleep, not hibernation of course) the monitor won't display anything (I tried both mini display port and mini hdmi), and I suspect also usb isn't working either since num lock in...
Hi, I noticed nuc5 support on Intel-NUC-DSDT-Patch RehabMan's repository so I tried to install Mojave on my NUC5i7RYB.
Unfortunately the system reboots with a "Panic on FB Memory Manager..." at the very first clover's boot (just before initial setup).
Bios updated and configured properly, I...
I found a M.2 BCM94352Z or a BCM94360CS2 with a NGFF to M.2 adapter, but since the only M.2 slot of my NUC7i7BNH is taken by the Samsung SSD 950 PRO, I wonder if is there any usb option instead.
Hi, can I know if is there any wifi adapter to provide handoff, continuity and "apple watch unlock feature" to the nuc?
(for bluetooth i'm actually using iogear GBU521 W6)
thank you,
I have three Philips 273V5 in full HD (1080p), primary is connected through the HDMI port, and it works quite well (even hotplug).
I tried type-C through an apple A1621 adapter but it doesn't work. So the other (extended) monitors are connected via two DIAMOND BVU3500 USB3 DisplayLink adapters...
First of all thanks for the support (and for the great project)
IGD Minimum Memory: 64 MB
IGD Aperture Size: 256 MB
IGD Primary Video Port: Auto
(picture attached)
On your NUC7i7BNH do you have latest bios installed?
Do you have the latest Mojave updates?
May some recently update on the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.