Recent content by buttadeus

  1. buttadeus

    << Solved >> Big Sur, AirportBrcmFixup.kext and BCM4322 Wifi card problem

    You don't have to set MimKernel because works with Catalina and Big Sur. Just place kext in EFI>Clover>Kexts>Other or, if you use Open Core place it in EFI>OC>Kexts. If using Open Core you must add the kext to the config list. I did it using Open core congigurator: open config.plist with open...
  2. buttadeus

    << Solved >> Big Sur, AirportBrcmFixup.kext and BCM4322 Wifi card problem

    Thank you very much! that kext did the job!
  3. buttadeus

    << Solved >> Big Sur, AirportBrcmFixup.kext and BCM4322 Wifi card problem

    This is what I intend to do. Thank you for your time!
  4. buttadeus

    << Solved >> Big Sur, AirportBrcmFixup.kext and BCM4322 Wifi card problem

    IO80211Family.kext from Mojave works on Catalina but gives kernel panic on Big Sur boot. AirPortBrcm4331.kext alone is not working on both 10.15.7 or 11.0.1. I removed Fake ID.
  5. buttadeus

    << Solved >> Big Sur, AirportBrcmFixup.kext and BCM4322 Wifi card problem

    Hi, my card shows in info.plist of AirportBrcmFixup.kext. I tried using both Fake ID you gave me with brcmfx-driver=2 but still not working (I hope I did it right) . Thank you for trying to help!
  6. buttadeus

    << Solved >> Big Sur, AirportBrcmFixup.kext and BCM4322 Wifi card problem

    Hi, my wifi card stoped working with Catalina but I was able to activate it again using IO80211Family.kext from Mojave. When I tried to do the same with big Sur, I got Kernel panic and I have to remove it. I tried to replace IO80211Family.kext with AirportBrcmFixup.kext but I can't make it work...
  7. buttadeus

    Gigabyte Z390 M Gaming build with working NVRAM

    If you mean if I try to install on a afps frive, the answer is yes.
  8. buttadeus

    Gigabyte Z390 M Gaming build with working NVRAM

    I removed that kext, now installer starts but on both OC and clover reboot here again and again:
  9. buttadeus

    Gigabyte Z390 M Gaming build with working NVRAM

    Thank you for your help!
  10. buttadeus

    Gigabyte Z390 M Gaming build with working NVRAM

    Managed to add verbose mode to OC and this is what I got:
  11. buttadeus

    Gigabyte Z390 M Gaming build with working NVRAM

    On clover I see nothing, just the apple in the middle. I don't know how to start OC in verbose mode but it does the same as clover. I started it again winth OC and made it work until first reboot but after that keeps rebooting. Than that I booted normally, I had to add IO80211Family.kext from...
  12. buttadeus

    Gigabyte Z390 M Gaming build with working NVRAM

    CFG Lock is disabled. Theese are Clover end Open Core I use (both work fine with 10.15.7):
  13. buttadeus

    Gigabyte Z390 M Gaming build with working NVRAM

    Hi, first of all I would like to thank you for your help! I am trying to install 10.11 but it stops on the black screen with the white apple. Same on clover and open core, both downloaded from the first post. On clover no message on verbose. I have the same motherboard but with i5 9400. Maybe...
  14. buttadeus

    Can not update to 10.14.6

    I also couldn't update to 10.14.6 but with your EFI folder I did it. I just changed SMBIOS with what I had: Imac 18.1. because I use 2 monitors and added Lilu and NoVPAJpeg.kext for JPG preview in finder. Thanks for sharing!
  15. buttadeus

    mojave 10.14.5 and itunes crash

    I changed from MacPro6.1 to Imac18.1 and everithing is working again (2 monitors, finder previews and iTunes).
Top