Recent content by bt993

  1. bt993

    [SOLVED] Reboot loop after OsxAptioFixDrv2 after BIOS update

    well, not only. But after that problem was solved yes, I ran into an issue with the graphics.
  2. bt993

    [SOLVED] Reboot loop after OsxAptioFixDrv2 after BIOS update

    I attached those as per your request. Is something else missing? Sorry, I would really like to know for the future... Another contributer at insanelymac was able to help me out. Should anybody run into the same issue, see this ->...
  3. bt993

    [SOLVED] Reboot loop after OsxAptioFixDrv2 after BIOS update

    hm I thought I did that already. I filled in the fields in Profile -> Build Signature, and I retried just now, but somehow the changes are not saved. Do I have to set it up somewhere else as well? EDIT: Nevermind, found it.
  4. bt993

    [SOLVED] Reboot loop after OsxAptioFixDrv2 after BIOS update

    I posted this in another forum as well and got the suggestion of: changing Internal Graphics to enable in the BIOS changing parallel port to disabled in the BIOS Enable KernelPm under Kernel and Kext Patches in the clover config file This got me past the few lines and I am now stuck here:
  5. bt993

    [SOLVED] Reboot loop after OsxAptioFixDrv2 after BIOS update

    Ok, I changed that. I tried all fixes that are available in clover. OsxAptioFixDrv-64 fails, while OsxAptioFix2Drv-64 does not seem to fail, but the system does not make it any further. Yes I thought maybe they are somehow not loaded, and therefore copied them to the other folders. I keep...
  6. bt993

    [SOLVED] Reboot loop after OsxAptioFixDrv2 after BIOS update

    sorry, I indeed had not read that. Here are the files, let's hope they help.
  7. bt993

    [SOLVED] Reboot loop after OsxAptioFixDrv2 after BIOS update

    Does anybody have an idea? I am stuck...
  8. bt993

    [SOLVED] Reboot loop after OsxAptioFixDrv2 after BIOS update

    Here are my current BIOS settings: BIOS Bootup NumLock State On Security Option System Full Screen LOGO Show Enabled Fast Boot Disabled Windows 8/10 Features Other OS LAN PXE Boot Option ROM Disabled Storage Boot Option Control UEFI Other PCI devices UEFI Peripherals Initial Display Output...
  9. bt993

    [SOLVED] Reboot loop after OsxAptioFixDrv2 after BIOS update

    Hi, A couple of months ago I built a hackintosh for a friend. Here are the details: Motherboard: Gigabyte - GA-B150M-D3H Processor: Intel - Core i7-6700K Graphics card: Gigabyte - GeForce GTX 960 I managed to get everything up and running with clover, until he performed some updates a couple...
  10. bt993

    Clover won't show Ubuntu install

    no, Ubuntu is installed in UEFI as well. I made sure the installer booted in UEFI and checked for the UEFI messages while booting the installed Ubuntu, and they showed.
  11. bt993

    Clover won't show Ubuntu install

    Hi, I just installed Ubuntu on my second SSD, but the installation does not show up in clover. I tried it with a seperate EFI partition on the Ubuntu drive and by installing the bootloader onto the same EFI partition as clover, but nothing seems to work. I also tried to put a custom entry in my...
  12. bt993

    [SOLVED] Enable Nvidia WebDrivers for GTX 960 in Clover

    this https://www.tonymacx86.com/threads/new-method-for-enabling-nvidia-web-drivers-in-clover.202341/ did the trick!
  13. bt993

    [SOLVED] Enable Nvidia WebDrivers for GTX 960 in Clover

    Hi, I am having an issue with the GTX 960. I installed the newest Nvidia Web drivers and they are working fine, but I have to go to the Clover Options -> Graphics Injector -> Use Nvidia WebDrivers each time I boot and cannot find where to set this in the config file. Does anyone know? Other than...
  14. bt993

    [SUCCESS] i7-5820k @ 4.3ghz, 2x GTX 970, GA-X99-UD4 Yosemite Hackintosh!

    hi, until now i just hat do click update =)
  15. bt993

    [SUCCESS] i7-5820k @ 4.3ghz, 2x GTX 970, GA-X99-UD4 Yosemite Hackintosh!

    Hi, I have my X99 System up-and-running since January and I never had any problems with any update.
Top