Recent content by billyjackintosh

its link is in post #14 looks like it came from newegg, but you could probably find just about anywhere and there are some links on first few pages of this threads, hope you post some photos of your build on here!!

hope this inst to late but its roughly 5mm or 1/4"

its working, I'm not sure what handoff support is , probably some cool feature I don't use lol ill post some install photos below not the best photos but I'm in a hurry and late for work haha

Anything is possible, I have been thinking about trying this. but I would need some help from the ppl on this site who know a bunch more about some things, such as the connectors for the screen and keyboard mousepad. seems crazy but, I just really dig the retro look of these things, I mean how...

I have been thinking about trying this

Great Post, with a simple but to the point title. I just ordered the same solution on ebay for 13$, but there is a seller with both items together for 18$. as of may 2017. I read the post mentioned in the mods comment but got lost in all the techie coding kext shizzel, ordered the AzureWave...

Also, a rivet gun is handy in case you want to take off the door or shelves ect. you can pick one up at a local hardware store. very easy to use and gives OEM finish , if you need to remove a rivet, drill out the center of it with a appropriate size bit. (roughly the same size as the inner...

Looks like a good start! Any updates ? Did Uncle Scott help ya out?!

Been super busy IRL work, bleh, But basicailly its pretty easy to mod a H60 , 90, etc. Most of them are 1/4" ID tubing, i used tycoon <-- tygon but any 1/4 ID tubing will work. i got about 10 feet just to make sure i had enough and in case i had to recut something. bleeding the air is...

H60 is 1/4 in ID tubing, i use tygon tubing

First Billyjackintosh Build w/G3 case mod [NEW HARDWARE] Just got this today! Cant wait to install them!!! :crazy: :beachball:

OK, Maybe I'm thinking about this to much but this step is confusing me or the wording is confusing me. its been a long day, maybe i can't understand what I'm trying to think about. "STEP 3: Recommended UEFI Settings If you're installing on a recommended CustoMac desktop with AMI UEFI, the...

Power Supply Rebuild photos, Enjoy! :clap: This was pretty fun Rebuild, although for some reason the solder on the new power supply wouldn't change phase even with my 300 watt iron!!! so i settled for a jumper made out of the plug so i can keep this project moving along. I am glad i was able...

My first idea on the build. i was going to go a full ATX but decided to go with a mATX, mainly because i didnt want to relocate my HDDs which will be SSD's. This is going to be a haswell platform. so i still haven't ordered the motherboard and other stuff yet. Chatting with David from...

Hey Gang, Thanks for all of your comments on my B&W G3 BILLYJACKINTOSH! Im bored again and decided to work on a G5 Case Mod. Goals of this Build: 1. Dissect the G5 (i got from ebay in a drunken vintage computer buying frenzy) without destroying it 2. Mod as much stuff possible to maintain the...