Recent content by bartrap

  1. bartrap

    Solved > ASRock Z390 Extreme 4, Mojave and USB 3.0 ports problem

    Thank you Zottwalker!:headbang: Antonio :)
  2. bartrap

    Solved > ASRock Z390 Extreme 4, Mojave and USB 3.0 ports problem

    Hi Zottwalker; can you please share your EFI directory; I have exactly the same board and processor; it would be highly appreciated as I have some issues with mine. I even have the same graphic card with it. Thanks in advance, Bart
  3. bartrap

    GA-EP45-UD3P and Sierra

    Juseon123, can you explain what I have to do with the ssd file ? I am using a GT710 card that is supporting Metal...
  4. bartrap

    GA-EP45-UD3P and Sierra

    Woaw terrific! am going to give it a try and let you know; Many THanks!
  5. bartrap

    Mojave on Gigabyte EP45-UD3P ver 1.0 F10

    moderator please remove this topic; solution is found elswhere on the forum, thank you.
  6. bartrap

    Mojave on Gigabyte EP45-UD3P ver 1.0 F10

    Dear people, I have made a system out of a Gigabyte p45-ud3p board with a q9550 proc and 8gb ram, which worked very stable with Mojave 10.4.6. Unfortunately and unintentionally, security file 2020-002 and the latest safari version update where applied. I am trying to build up from the start...
  7. bartrap

    Mojave on EP45-UD3P (almost)

    Hi I have successfully installed Mojave on the same board with your EFI folder (THANKS!!!) and a gt610 graphic card. The only thing different is the processor is not a q9560 but a q9550. Can you help me out to adjust the settings in your EFI dir ? I think I need to change the ACPI DSDTs...
  8. bartrap

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    I have a MSI Gaming X 8 GB; under windows it shows the latest bios installed. There is no switch found next to the power connector.
  9. bartrap

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Checked on win 10 the RX580; it has the tc341mh.612 bios version; it is reported the correct latest version by MSI. I cannot find any switch for double BIOS mentioned by jb007
  10. bartrap

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Hello @jb007; Am going to check; Thanks!!
  11. bartrap

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Ha thanks; I will not edit my replies then but reply like this; the RX580 is indeed 2nd hand; I do not know what it was used for previously. I will try to see what Vbois is in there and see if needed I can flash it back to the original. A pity I can't get the UHD630 DP port to work in a normal...
  12. bartrap

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Hi Casey; I edited post # 5294 but I think I better write replies instead of correcting a message right ?
  13. bartrap

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Hi Casey; Yes I thought about that too. I cannot find any way on the monitor to get better display settings; I am going to try to borrow someone else's DP monitor to be sure.... EDIT; I have tried Everything under windows; I get a fine result on my monitor in this case; Both the RX580 and the...
  14. bartrap

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Morning Casey ! With CSM enabled the DP of the RX580 is still not working; there are some sub settings on CSM in the BIOS 4.01 of the ASRock Z390 Extreme4 board though I left then at default. It's a pity the onboard DP gives an abnormal (matte) display once arrived at the desktop; I do not...
  15. bartrap

    [SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

    Hi Casey; I tried your suggestion with CSM support off, but I get no output on the DP of the RX580; which is not really a problem because I will not use that one. So the only thing bugging me is that the UHD630 DP port goes in to 'matte' mode the moment I see the Apple logo appear after the...
Top