Recent content by Asrake

Hello @CaseySJ . I could not make any progress from then on . Hotplug nerver work. I am really need your help. Thanks.

Hot plug does not work at all. I have a Thunderbolt eGPU RX 580.

Hello @CaseySJ. It is me again. I still can not make the hotplug work properly . Is there any suggestion or posibility could made it success ? Thank you for your great help.

@CaseySJ genius bro ! I should tell you that this is a very special thunderbolt card used on hp z2 series(z2 g4/g5/g8 sff/twr,my machine is z2 g5 sff which is w480 chipset) with tow part of it , a pcie card and a hp flex io card with tow wires chain them together . The PD firmware indeed locate...

Hello @CaseySJ I found that if I modify the original HP_Tormund_SSID846C_TR_HR_2C_C1_rev61_0_1_2_1_SEC3_sign.bin (the CH341A dumped will not work)accord to MOD1 you provided,it works! After try to modify the SSDT-TB3-HackinDROM-HP-Tormund.aml the thunderbolt SSP1 port show up. If cold boot...

@CaseySJ Still same problem as shown below. USB controller recognize as AppleUSBXHCITR but with no XHC5 SSP1 OR HS01 port. Maybe there is something other than the specific byte in this version of firmware. I will try to find some old version firmware and diff them with MOD4 use UltraCompare...

Hello @CaseySJ. I test the MOD3, just same as MOD1 and MOD2. Thunderbolt bus recognized, but can not recognize any devices attach to it either cold boot nor hotplug . I found that when it cooperate with SSDT-TB3-HackinDROM-HP-Tormund.aml, USB port in Hackintool seems could not be found.

Hello @CaseySJ . I test both MOD1 and MOD2,both of them can make the thunderbolt tree show up (with a thunderbolt 3 egpu plug in) but neither of them can recognize the egpu or any other usb c device . It seems (yeah ,just seems)that any modification to the firmware will lead to the thunderbolt...

@CaseySJ Yes I do have a CH341A reader/writer and I read the firmware now (the chip is MX25V8035FM2I,2MB size).Origianl HPTBT.aml and my EFI also provide below. It is on RP09 and the GPE may be _L4E ? Thank you for your help.

Hi @CaseySJ, I have a HP Tthunderbolt add-in PCIe card (15E8,JHL7340,but it shows as JHL7540 in both Windows and macOS) with only one typec-port. Can you please modify the firmware for me. And which SSDT should I use for hot plug support. Here is my origianl firmware and original HPTBT.aml(from...

The UHD model can try my clover config.plist on page 13 floor #128 if you can't get it work use RehabMan's config.plist

Your power management has been messed up, search 'pmset reset to default' on google and then disable S4 sleep use the code above.

It just can't get sleep on my machine, perhaps my ssd issue. Your case is different from me, your should try sudo pmset -a hibernatemode 0 sudo rm /var/vm/sleepimage sudo mkdir /var/vm/sleepimage disable suspend to disk or S4 sleep. Could you please tell me your ssd brand and other detail info ?

No, it works well on my machine, check your router or something else.